bigbloodyturbo Posted October 29, 2012 Share Posted October 29, 2012 (edited) Has anyone got any info on reliable mappers in Scotland. My Car is in with Wallace performance in Aberdeen at the moment and they are complete jokes and have been messing me about for weeks now. The car has a syvecs in it at the moment. Edited October 29, 2012 by bigbloodyturbo (see edit history) Quote Link to comment Share on other sites More sharing options...
Geo Posted October 29, 2012 Share Posted October 29, 2012 No one i would trust mate TBH. If you can book RyanG all you would pay for mapping and his Travel Expenses, which might be a bit as your way up there. Or you could drive off boost down to see him, thats what i did. edit - Wallace Performance im sure they worked on Supraman(Ryan's car) and TBH id pull my car out of there Quote Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted October 29, 2012 Author Share Posted October 29, 2012 No one i would trust mate TBH. If you can book RyanG all you would pay for mapping and his Travel Expenses, which might be a bit as your way up there. Or you could drive off boost down to see him, thats what i did. edit - Wallace Performance im sure they worked on Supraman(Ryan's car) and TBH id pull my car out of there I might have to do that I think. These guys are complete nobs, if I wasn't offshore I'd be round there now to take the car away. They've had it for nearly 3 weeks and have just told me that I'm not getting mapped untill the 13 th of November, all they've done in 2.5 weeks is the cold start????? Quote Link to comment Share on other sites More sharing options...
drift_bear Posted October 29, 2012 Share Posted October 29, 2012 I wouldn't trust Wallace performance with any performance side of things on my car! Like geo has suggested give Ryan a shout and see what he says/suggests? Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted October 29, 2012 Share Posted October 29, 2012 I'd give Ordnance Survey a call. Quote Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted October 29, 2012 Author Share Posted October 29, 2012 I'd give Ordnance Survey a call. You got a needle and thread? Quote Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted October 29, 2012 Author Share Posted October 29, 2012 I wouldn't trust Wallace performance with any performance side of things on my car! Like geo has suggested give Ryan a shout and see what he says/suggests? I've been told the guy that used to do the mapping and knew his stuff was called Russ but has since left to go somewhere else, I thought there might of been somewhere else in the northeast that could do it Quote Link to comment Share on other sites More sharing options...
drift_bear Posted October 29, 2012 Share Posted October 29, 2012 I've been told the guy that used to do the mapping and knew his stuff was called Russ but has since left to go somewhere else, I thought there might of been somewhere else in the northeast that could do it Not that I'm aware of bud, like geo said again there's nobody on this side of border Quote Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted October 29, 2012 Author Share Posted October 29, 2012 Not that I'm aware of bud, like geo said again there's nobody on this side of border Pants, oh well I think it may be time for a road trip then. Thanks for the input, I think I'll take the car out off there and figure something else out. Quote Link to comment Share on other sites More sharing options...
Geo Posted October 29, 2012 Share Posted October 29, 2012 what are you actually getting done bud? Quote Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted October 29, 2012 Author Share Posted October 29, 2012 what are you actually getting done bud? I blew my hg on my tt 2 years ago so I decided to fix it myself and single it as a wee project in my spare time when I'm not offshore. I bought stewartW's syvecs and ordered a loom from ryan due to it being auto. All I needed Wallace to do was map the car for its bigger injectors and obviously the new turbo, that was it. Quote Link to comment Share on other sites More sharing options...
Geo Posted October 29, 2012 Share Posted October 29, 2012 be easy enough to put a base map on it, then drive to meet Ryan dude Quote Link to comment Share on other sites More sharing options...
Crouch Posted October 29, 2012 Share Posted October 29, 2012 I've been told the guy that used to do the mapping and knew his stuff was called Russ but has since left to go somewhere else, I thought there might of been somewhere else in the northeast that could do it Mr bigbloodyturbo i believe that the person from wallace that was good left to go to HQ Performance in Dalgety bay whom have a rather good dyno so the pro tuners on here seem to think, thats not to say they are without risk as all dyno operaters will tell you. I've been told by a few people that they know what they are doing. The other place that has been recomended can help but don't think they have a dyno so don't know who they source out the work to and they're East coast to. Quote Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted October 30, 2012 Author Share Posted October 30, 2012 Mr bigbloodyturbo i believe that the person from wallace that was good left to go to HQ Performance in Dalgety bay whom have a rather good dyno so the pro tuners on here seem to think, thats not to say they are without risk as all dyno operaters will tell you. I've been told by a few people that they know what they are doing. The other place that has been recomended can help but don't think they have a dyno so don't know who they source out the work to and they're East coast to. cheers mate, I've been in contact with him this morning, very helpful chap:-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.