Gpro Posted October 18, 2012 Share Posted October 18, 2012 i need a bit of information on pros and cons of each clutch as the price difference aint exactly similar, so what makes a twin or triple plate that much better Single plate clutch is around £900 and twin plate £2K+ Quote Link to comment Share on other sites More sharing options...
T14PPA Posted October 18, 2012 Share Posted October 18, 2012 U got a torque converter Quote Link to comment Share on other sites More sharing options...
spikedjack Posted October 18, 2012 Share Posted October 18, 2012 I presume he's got a manual for the reason of enquiring about a clutch Quote Link to comment Share on other sites More sharing options...
V8KILR Posted October 18, 2012 Share Posted October 18, 2012 Single plate clutches have a heavier pedal pressure to hold the same hp but they are alot cheaper as you have noticed. What hp does it need to hold? Quote Link to comment Share on other sites More sharing options...
hodge Posted October 18, 2012 Share Posted October 18, 2012 I've just gone from an ORC twin plate clutch and flywheel to a DC-Automotice single disc clutch with a stock flywheel. Simply because I can't handle the horrendous noise that comes from a multi plate clutch and lightened flywheel. Quote Link to comment Share on other sites More sharing options...
Hellstrom Posted October 18, 2012 Share Posted October 18, 2012 Single Plate pros. Price, installation, Cons. More load on thrust bearing chews fly Wheel (sinter) Multiplate pro. Weight closer to center. Takes more torque more solid built pressure Plate. Cons. Takes modification mostly to fit. Price. Noisy Quote Link to comment Share on other sites More sharing options...
Wez Posted October 18, 2012 Share Posted October 18, 2012 Multiplate clutches are lighter but noisy and can be very on / off in engagement. I run an OS Giken twin plate and with the peddle down its sounds broken, can also be a mission in heavy traffic as they dont like being slipped. I wouldnt advise one for a daily driver. There are plenty of single plate options available to hold decent torque, most of which have been tried by members on here. Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted October 18, 2012 Share Posted October 18, 2012 U got a torque converter Quote Link to comment Share on other sites More sharing options...
Jamesy Posted October 18, 2012 Share Posted October 18, 2012 multiplate clutches are lighter but noisy and can be very on / off in engagement. I run an os giken twin plate and with the peddle down its sounds broken, can also be a mission in heavy traffic as they dont like being slipped. I wouldnt advise one for a daily driver. There are plenty of single plate options available to hold decent torque, most of which have been tried by members on here. yep Quote Link to comment Share on other sites More sharing options...
hodge Posted October 18, 2012 Share Posted October 18, 2012 The clutch I've just bought from DC-Automotive is a stage 4 which is a sprung disc and rated to 765 ft/lb, the strange 5 is unsprung and rated to something like 925 ft/lb, which is way way more than anyone on here could ever need. As said, there way cheaper than multi-plate clutches with no noise if you use a stock dual mass flywheel. I can't comment on the pedal feel though as its not fitted yet. It's something I can deal with to get away from the horrendous plate chatter of multi plates. I know the RPS street max clutches are a very heavy pedal but hold iirc 800 ft/lb. Quote Link to comment Share on other sites More sharing options...
chazuk Posted October 18, 2012 Share Posted October 18, 2012 On supraforums they bang on about crank walk allot with heavy single plate clutches is this anything to worry about or are they talking rubbish ?. Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted October 18, 2012 Share Posted October 18, 2012 I have an RPS triple plate and its the nuts. Hardly any noise. So its also down to the brand aswell that makes a difference. Id never go back to single plate after the experiences i have had.. Quote Link to comment Share on other sites More sharing options...
johnny g Posted October 18, 2012 Share Posted October 18, 2012 On supraforums they bang on about crank walk allot with heavy single plate clutches is this anything to worry about or are they talking rubbish ?. The HPF Feramic gets slated for crank walk RPS Carbon Triple is epic when you get used to it Quote Link to comment Share on other sites More sharing options...
Wez Posted October 18, 2012 Share Posted October 18, 2012 Its more a question for CW but I assume the crank walk is due to pressure plates being way to heavy and shunting the crank Quote Link to comment Share on other sites More sharing options...
hodge Posted October 18, 2012 Share Posted October 18, 2012 Its more a question for CW but I assume the crank walk is due to pressure plates being way to heavy and shunting the crank I spoke to Chris about this yesterday when I dropped my engine off funny enough. He explained that most damage was done when starting a single plate clutch with heavy clamping force with the clutch pedal depressed, as there's no lubrication there for the thrust bearings on start up, which eventually wears through the thrust bearing and either into the crank itself or the block. He also commented on your personal Setup of your supra, saying that in his opinion your got it spot on with a perfect setup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.