rick001 Posted October 4, 2012 Share Posted October 4, 2012 With a powerful single turbo supra, do you have to upgrade the clutch slave cylinder when you put an uprated clutch in to prevent fluid loss due to high pressure perhaps? Quote Link to comment Share on other sites More sharing options...
sideexitsupra Posted October 4, 2012 Share Posted October 4, 2012 Short answer is no. Longer answer is the Whifbitz race cars just used std clutch hydraulics with a braided pipe replacing the rubber one between master and slave cylinders. Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted October 4, 2012 Share Posted October 4, 2012 I just replaced master ans slave when the RPS triple plate went on. All is fine on my single Quote Link to comment Share on other sites More sharing options...
Westy Posted October 5, 2012 Share Posted October 5, 2012 As above, Im sure it isn't necessary, but here's the product of you want to anyway: http://www.twinsturbo.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=118&category_id=1&manufacturer_id=0&option=com_virtuemart&Itemid=8 Quote Link to comment Share on other sites More sharing options...
Jos Posted October 5, 2012 Share Posted October 5, 2012 Depending on your clutch, you may have to change your master cylinder: http://www.mkivsupra.net/vbb/showthread.php?194804-Different-slave-cylinders-6spd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.