SNIPERTT Posted September 20, 2012 Author Share Posted September 20, 2012 yep all done by yours truly like i said with the help of the guide somewhere on here Quote Link to comment Share on other sites More sharing options...
Josh Posted September 21, 2012 Share Posted September 21, 2012 That front badge is huge! You've done some nice work so far. Keep it up Quote Link to comment Share on other sites More sharing options...
dan294 Posted September 21, 2012 Share Posted September 21, 2012 Can't believe nobody else has asked this one..... Where do you put your shopping? Quote Link to comment Share on other sites More sharing options...
st3ven1 Posted September 21, 2012 Share Posted September 21, 2012 Can't believe nobody else has asked this one..... Where do you put your shopping? Never mind that, where do you put the roof? Not much point in getting an aero then adding a huge sub, making the taking of the roof off everywhere except from your house a no go. Also I'm not sold on a couple of things: The blue lights.... everywhere, especially the strips in the engine bay. Not my taste, but if you like them that's all that matters. The serrated aluminium sitting against the compressed air pipe work, this definitely needs looked at as it will cut through that pipe in no time at all. Maybe you could cut some thin tubing length ways and cover the aluminium cut outs. Quote Link to comment Share on other sites More sharing options...
dan294 Posted September 21, 2012 Share Posted September 21, 2012 Never mind that, where do you put the roof? Not much point in getting an aero then adding a huge sub, making the taking of the roof off everywhere except from your house a no go. Also I'm not sold on a couple of things: The blue lights.... everywhere, especially the strips in the engine bay. Not my taste, but if you like them that's all that matters. The serrated aluminium sitting against the compressed air pipe work, this definitely needs looked at as it will cut through that pipe in no time at all. Maybe you could cut some thin tubing length ways and cover the aluminium cut outs. Oh yeah! Never spotted that it was an aero. On a side note about the ally bit, K&N supply somehting similar to the rubber seals that you get on toyr doors or bootlid for their Typhoon systems that have heat shields. Or get some silicone hose and cut a line through that and sit it over the top? Quote Link to comment Share on other sites More sharing options...
SNIPERTT Posted September 21, 2012 Author Share Posted September 21, 2012 Hi guys thanks for the feedback ..... In response to some of the comments ... the blue lights are just a weakness of mine I can't help myself but that's all there is gonna be I'm not putting anymore in and to be honest at night it does look nice ... As far as the boot is concerned I do intend to make a custom build so the roof can fit in the brackets over the top but for the time being if I want to take the roof off I drop the rear seat and move the sub forward and the roof goes in its normal place (I'll take a photo to show what I mean). I know exactly what you guys mean about the ally bit, i need to modify it since the new pipe work has gone in there was plenty of room before, it was a quick fix anyway I really should make a better one from scratch ! And as for where does the shopping go ... If I do ever go shopping in it there's still room in the boot but most of the time I don't know if you noticed in the pics but I've got a big ole Dodge Ram sittin on the drive I think there's more than enough room for shopping in that Thanks again for the replies any comments/ suggestions more than welcome hopefully I'll meet some of you guys at a meet somewhere down the line I still haven't been to one yet so that's a definite must in the near future Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted September 21, 2012 Share Posted September 21, 2012 That rubber hose on your heat shield - its days are numbered. Quote Link to comment Share on other sites More sharing options...
SNIPERTT Posted September 21, 2012 Author Share Posted September 21, 2012 Simple solution for putting the roof in the boot (it's raining where I am at the mo so the roof ain't coming off to show how it fits) And before anyone says it ... Yes I know she needs a bloody good clean Quote Link to comment Share on other sites More sharing options...
SNIPERTT Posted September 21, 2012 Author Share Posted September 21, 2012 What rubber hose Gaz ? Don't forget I've just had a new FMIC fitted with new piping so there's no rubber there anymore and I did cut it back after those photos were taken and smoothed it all off just in case anyway but I will be taking the advice I was given and cover the edges with some sort of piping/rubber so as not to scratch the nice new shiny pipes Quote Link to comment Share on other sites More sharing options...
SNIPERTT Posted September 21, 2012 Author Share Posted September 21, 2012 No more rubber but Shield needs to be re-cut !!! Quote Link to comment Share on other sites More sharing options...
Shane Posted September 21, 2012 Share Posted September 21, 2012 Well done, looks good. I had simular problems with the dash bubbling too. BPU is a real difference from stock eh. Quote Link to comment Share on other sites More sharing options...
SNIPERTT Posted September 21, 2012 Author Share Posted September 21, 2012 Cheers pal ... I can't think of what it is that makes it do that I sprayed my mates Mazda's interior recently in exactly the same way as I did mine and his is fine ? Yeah I knew there would be a difference but WOW .... I had the work done at Whifbitz and at first only had the stage 2 done which was last week and I didn't really notice much, yeah better throttle response and she sounded nicer but no REAL performance change then a few things went well for me with work and I couldn't resist so booked in the car with Paul again this week and on Wednesday had the rest of the BPU kit fitted ........ The pull she gets on the kick down is unbelievable my traction control button is busted at the mo which is bloody annoying cos the power keeps getting cut when you take off Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.