ripped_fear Posted August 27, 2012 Share Posted August 27, 2012 (edited) Hi all, Another wheel thread, I was wondering if the following would fit the rear of a stock supra? and if so would it require an Roll of the arch? The wheel spec is as followed- 18" 10.5J ET24 Thanks in advance EDIT- another set of wheels in question see post 31... Edited September 2, 2012 by ripped_fear (see edit history) Link to comment Share on other sites More sharing options...
Nic Posted August 27, 2012 Share Posted August 27, 2012 They'd stick out around 15mm past the stock wheels arches. Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 They'd stick out around 15mm past the stock wheels arches. Past wheels or arch? would this mean they should clear with a mild roll? Link to comment Share on other sites More sharing options...
Nic Posted August 27, 2012 Share Posted August 27, 2012 The rear wheels in the pic are 18x10 +32 18x10.5 +24 would stick out 14mm more in comparison, you'd either need wheel arches or have the stock arches pulled out by around 14mm - which I'm not sure is doable. Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 Damn Thanks Nic Link to comment Share on other sites More sharing options...
James Posted August 27, 2012 Share Posted August 27, 2012 Or go stretched tyres and lots of camber Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 No camber happening here, would go a mild stretch if I really had too but to loose 15mm is going to be pushing it to far. Want it to look good. Link to comment Share on other sites More sharing options...
James Posted August 27, 2012 Share Posted August 27, 2012 Hence the " " Marc(AB10)'s Works are 18x11 et22 (or 24, can't remember which) and he has stock arches with a roll. Though he is mega low on coilovers so there is a bit of camber there. Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 Hence the " " Marc(AB10)'s Works are 18x11 et22 (or 24, can't remember which) and he has stock arches with a roll. Though he is mega low on coilovers so there is a bit of camber there. Yeah his looks awesome too, but that look would need my archs to be pulled too, plus the slammed look on the island is going to end in tears. It scrapes everywhere now and im on stock springs. Link to comment Share on other sites More sharing options...
mattdavies Posted August 27, 2012 Share Posted August 27, 2012 Roll the rear arch and run a 265 tyre and you will be alright, I run 18x10 et20 with 255 on and it scrubs but then again I haven't rolled my arches Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 would a 265 on a 10.5 j rim not look very streched? Link to comment Share on other sites More sharing options...
mattdavies Posted August 27, 2012 Share Posted August 27, 2012 Would be similar to what Porsche run standard on some of their wheels, more a tweak then a stretch. 255 would be ok on 10.5 I stated a thread a while back about tyres on rims and someone posted min / ideal / max tyre width for wheel widths Link to comment Share on other sites More sharing options...
mattdavies Posted August 27, 2012 Share Posted August 27, 2012 Just checked and it was you lol Link to comment Share on other sites More sharing options...
alex2jz Posted August 27, 2012 Share Posted August 27, 2012 I'd say that's a bad offset for a 10.5J wheel if you don't want serious fender mods. I'm running 10.5J with ET40 and the wheels already look pretty aggressive. 275 tires on mine already look a bit stretched. Link to comment Share on other sites More sharing options...
ripped_fear Posted August 28, 2012 Author Share Posted August 28, 2012 Such a shame, cheers guys but looking at that pic above means its guna be a no go. Shame as found a bargin set of rears thats all Link to comment Share on other sites More sharing options...
mattdavies Posted August 28, 2012 Share Posted August 28, 2012 What are these wheel you were looking at ? Is it just rears or a staggered set ? Link to comment Share on other sites More sharing options...
alex2jz Posted August 28, 2012 Share Posted August 28, 2012 Such a shame, cheers guys but looking at that pic above means its guna be a no go. Shame as found a bargin set of rears thats all EDIT : Question was asked above. Link to comment Share on other sites More sharing options...
mattdavies Posted August 28, 2012 Share Posted August 28, 2012 Think he may be looking at the 19" wheels scooby slayer has for sale ,the volks one. If so I'm not sure with 19" if a stretch would work Link to comment Share on other sites More sharing options...
alex2jz Posted August 28, 2012 Share Posted August 28, 2012 Think he may be looking at the 19" wheels scooby slayer has for sale ,the volks one. If so I'm not sure with 19" if a stretch would work Don't think so mate. He said they were 18". 10.5J, ET24 and 19" would be nuts, you'd have to cut a chunk off the fender lol Link to comment Share on other sites More sharing options...
Noz Posted August 28, 2012 Share Posted August 28, 2012 do it, roll the archs slightly. not a huge job mate Link to comment Share on other sites More sharing options...
ripped_fear Posted August 28, 2012 Author Share Posted August 28, 2012 No not his mate the wheels where a pair of rims on Driftworks- http://www.driftworks.com/forum/wheels-tyres-sale-private-sales/180113-pair-18-10-5j-et24-garson-wheels-black-polished-lip.html Was going to get them and a Pair of Roat D2's for the front to give me the SSR or Work meister look for half the price. Link to comment Share on other sites More sharing options...
mattdavies Posted August 28, 2012 Share Posted August 28, 2012 I would be tempted to bite the bullet, my wheels have room to go wider if I rolled the arches Link to comment Share on other sites More sharing options...
ripped_fear Posted August 28, 2012 Author Share Posted August 28, 2012 If they will fit with a roll i will go for it, but judging by the info looks as though they wont. Link to comment Share on other sites More sharing options...
mattdavies Posted August 28, 2012 Share Posted August 28, 2012 http://s203.photobucket.com/albums/aa284/mattdavies1988/?action=view¤t=IMG00560-20120510-2059.jpg&mediafilter=noflash Link to comment Share on other sites More sharing options...
ripped_fear Posted August 28, 2012 Author Share Posted August 28, 2012 The rears on that look good! is that the same spec as i have enquired about then? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now