ripped_fear Posted August 27, 2012 Share Posted August 27, 2012 (edited) Hi all, Another wheel thread, I was wondering if the following would fit the rear of a stock supra? and if so would it require an Roll of the arch? The wheel spec is as followed- 18" 10.5J ET24 Thanks in advance EDIT- another set of wheels in question see post 31... Edited September 2, 2012 by ripped_fear (see edit history) Quote Link to comment Share on other sites More sharing options...
Nic Posted August 27, 2012 Share Posted August 27, 2012 They'd stick out around 15mm past the stock wheels arches. Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 They'd stick out around 15mm past the stock wheels arches. Past wheels or arch? would this mean they should clear with a mild roll? Quote Link to comment Share on other sites More sharing options...
Nic Posted August 27, 2012 Share Posted August 27, 2012 The rear wheels in the pic are 18x10 +32 18x10.5 +24 would stick out 14mm more in comparison, you'd either need wheel arches or have the stock arches pulled out by around 14mm - which I'm not sure is doable. Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 Damn Thanks Nic Quote Link to comment Share on other sites More sharing options...
James Posted August 27, 2012 Share Posted August 27, 2012 Or go stretched tyres and lots of camber Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 No camber happening here, would go a mild stretch if I really had too but to loose 15mm is going to be pushing it to far. Want it to look good. Quote Link to comment Share on other sites More sharing options...
James Posted August 27, 2012 Share Posted August 27, 2012 Hence the " " Marc(AB10)'s Works are 18x11 et22 (or 24, can't remember which) and he has stock arches with a roll. Though he is mega low on coilovers so there is a bit of camber there. Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 Hence the " " Marc(AB10)'s Works are 18x11 et22 (or 24, can't remember which) and he has stock arches with a roll. Though he is mega low on coilovers so there is a bit of camber there. Yeah his looks awesome too, but that look would need my archs to be pulled too, plus the slammed look on the island is going to end in tears. It scrapes everywhere now and im on stock springs. Quote Link to comment Share on other sites More sharing options...
mattdavies Posted August 27, 2012 Share Posted August 27, 2012 Roll the rear arch and run a 265 tyre and you will be alright, I run 18x10 et20 with 255 on and it scrubs but then again I haven't rolled my arches Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 27, 2012 Author Share Posted August 27, 2012 would a 265 on a 10.5 j rim not look very streched? Quote Link to comment Share on other sites More sharing options...
mattdavies Posted August 27, 2012 Share Posted August 27, 2012 Would be similar to what Porsche run standard on some of their wheels, more a tweak then a stretch. 255 would be ok on 10.5 I stated a thread a while back about tyres on rims and someone posted min / ideal / max tyre width for wheel widths Quote Link to comment Share on other sites More sharing options...
mattdavies Posted August 27, 2012 Share Posted August 27, 2012 Just checked and it was you lol Quote Link to comment Share on other sites More sharing options...
alex2jz Posted August 27, 2012 Share Posted August 27, 2012 I'd say that's a bad offset for a 10.5J wheel if you don't want serious fender mods. I'm running 10.5J with ET40 and the wheels already look pretty aggressive. 275 tires on mine already look a bit stretched. Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 28, 2012 Author Share Posted August 28, 2012 Such a shame, cheers guys but looking at that pic above means its guna be a no go. Shame as found a bargin set of rears thats all Quote Link to comment Share on other sites More sharing options...
mattdavies Posted August 28, 2012 Share Posted August 28, 2012 What are these wheel you were looking at ? Is it just rears or a staggered set ? Quote Link to comment Share on other sites More sharing options...
alex2jz Posted August 28, 2012 Share Posted August 28, 2012 Such a shame, cheers guys but looking at that pic above means its guna be a no go. Shame as found a bargin set of rears thats all EDIT : Question was asked above. Quote Link to comment Share on other sites More sharing options...
mattdavies Posted August 28, 2012 Share Posted August 28, 2012 Think he may be looking at the 19" wheels scooby slayer has for sale ,the volks one. If so I'm not sure with 19" if a stretch would work Quote Link to comment Share on other sites More sharing options...
alex2jz Posted August 28, 2012 Share Posted August 28, 2012 Think he may be looking at the 19" wheels scooby slayer has for sale ,the volks one. If so I'm not sure with 19" if a stretch would work Don't think so mate. He said they were 18". 10.5J, ET24 and 19" would be nuts, you'd have to cut a chunk off the fender lol Quote Link to comment Share on other sites More sharing options...
Noz Posted August 28, 2012 Share Posted August 28, 2012 do it, roll the archs slightly. not a huge job mate Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 28, 2012 Author Share Posted August 28, 2012 No not his mate the wheels where a pair of rims on Driftworks- http://www.driftworks.com/forum/wheels-tyres-sale-private-sales/180113-pair-18-10-5j-et24-garson-wheels-black-polished-lip.html Was going to get them and a Pair of Roat D2's for the front to give me the SSR or Work meister look for half the price. Quote Link to comment Share on other sites More sharing options...
mattdavies Posted August 28, 2012 Share Posted August 28, 2012 I would be tempted to bite the bullet, my wheels have room to go wider if I rolled the arches Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 28, 2012 Author Share Posted August 28, 2012 If they will fit with a roll i will go for it, but judging by the info looks as though they wont. Quote Link to comment Share on other sites More sharing options...
mattdavies Posted August 28, 2012 Share Posted August 28, 2012 http://s203.photobucket.com/albums/aa284/mattdavies1988/?action=view¤t=IMG00560-20120510-2059.jpg&mediafilter=noflash Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 28, 2012 Author Share Posted August 28, 2012 The rears on that look good! is that the same spec as i have enquired about then? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.