Caesard Posted August 21, 2012 Share Posted August 21, 2012 I just went bpu, and have been trying to tune my hks evc. But whenever I am on around 0.9 or 1 bar of boost, the hard pipe leading from the throttle body to the SMIC always pops off, regardless of what I use to secure it (jubilee clips et al). Has happened twice now. Any help as to why it does that and a possible solution? Link to comment Share on other sites More sharing options...
scoooby slayer Posted August 21, 2012 Share Posted August 21, 2012 is it a proper hardpipe with a lip on it or just a smooth pipe ? if theres no lip the jubilee has nothing to clamp behind to hold it on. Link to comment Share on other sites More sharing options...
David P Posted August 21, 2012 Share Posted August 21, 2012 Fit stainless steel high pressure Mikalor hose clamps and forget it. http://www.mikalor.com/eng/company/mikalor-hose-clamps/3-high-pressure/abrazadera-supra-inoxidable-w5/ Link to comment Share on other sites More sharing options...
RobD Posted August 21, 2012 Share Posted August 21, 2012 Bead the intercooler pipe as said previous if there's no lip for the clamp to hold on to, and make sure it's a decent jubilee clip and not a mickey mouse one! Link to comment Share on other sites More sharing options...
Caesard Posted August 21, 2012 Author Share Posted August 21, 2012 There is no lip on the hard pipe. Is there a way of creating one? Link to comment Share on other sites More sharing options...
RobD Posted August 21, 2012 Share Posted August 21, 2012 Have a bead of weld put around the edge of the end of pipe, make sure it's enough to stop the jubilee moving off the pipe! Link to comment Share on other sites More sharing options...
Caesard Posted August 22, 2012 Author Share Posted August 22, 2012 Thanks, will do that. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now