neilthenut Posted August 19, 2012 Share Posted August 19, 2012 guts i'm at the ponit on my project build where i'm starting to wire the car and i'm after complete breakdowns for complete car- fuse box etc all i seam to find is USDM- LHD, and in need of JDM can anyone point me in the direction of some JDM/uk stuff please Quote Link to comment Share on other sites More sharing options...
neilthenut Posted August 22, 2012 Author Share Posted August 22, 2012 thanks guys- your help means so much.... Quote Link to comment Share on other sites More sharing options...
heckler Posted August 22, 2012 Share Posted August 22, 2012 thanks guys- your help means so much.... i'm pretty sure the fuse boxs are the same... nearly all the electrical diagrams are for US spec cars, I've been using the US US spec diagrams for my JSpec for years with no problems. I am yet to see one for a JDM/UK car. Quote Link to comment Share on other sites More sharing options...
merckx Posted August 22, 2012 Share Posted August 22, 2012 (edited) thanks guys- your help means so much.... You're very welcome. Unbeknown to you last Sunday I had a good look through the files that I've accumulated over the years to see if there was anything for RHD, I couldn't find anything. Just the LHD stuff. http://www.turbosupras.com/pages/pages/technical/jza80/a80tsrm.htm Edited August 22, 2012 by merckx (see edit history) Quote Link to comment Share on other sites More sharing options...
neilthenut Posted August 26, 2012 Author Share Posted August 26, 2012 - - - Updated - - - i'm pretty sure the fuse boxs are the same... nearly all the electrical diagrams are for US spec cars, I've been using the US US spec diagrams for my JSpec for years with no problems. I am yet to see one for a JDM/UK car. thanks also Quote Link to comment Share on other sites More sharing options...
neilthenut Posted August 26, 2012 Author Share Posted August 26, 2012 You're very welcome. Unbeknown to you last Sunday I had a good look through the files that I've accumulated over the years to see if there was anything for RHD, I couldn't find anything. Just the LHD stuff. http://www.turbosupras.com/pages/pages/technical/jza80/a80tsrm.htm thanks, i do Appreciate it Quote Link to comment Share on other sites More sharing options...
Guest darrenhopper Posted August 31, 2012 Share Posted August 31, 2012 Hi mate, I've just finished wiring up a conversion using a JDM N/A motor & it's still fairly fresh in my mind. Send me over a PM with an e-mail address & I will send you enough diagrams & connection lists (both N/A & TT) to make you wish you hadn't asked! Good luck with the conversion! Quote Link to comment Share on other sites More sharing options...
Ian C Posted August 31, 2012 Share Posted August 31, 2012 You could post them all up here in a thread for others in the future, if you want Quote Link to comment Share on other sites More sharing options...
Guest darrenhopper Posted August 31, 2012 Share Posted August 31, 2012 (edited) Alright then, below are the links to the documents that got me through my motor swap. The first one is a fantastic document that I cannot take any credit for. I cannot remember where I found it or who put me on to it but it has been flawlessly accurate & has made the whole process go off without a hitch: The important signals have been highlighted. For basic operation of the engine only you will need to wire two relays in on the EA1 & EA2 plugs in the engine bay. I salvaged the matching plug from under the Supra relay box to keep this tidy. You will also need a handful of 12v & switched 12v signals on the Orange Il1 & Grey IJ1 plugs by the ECU. These are all detailed in the spreadsheet. Once you're up & running you can work through the dashboard signals matching up ECU wires with the matching signals from your old ECU or wiring direct to the clocks. https://docs.google.com/open?id=0BySnYhF5aj65b3pzY0VNb1ZiYkk The second one is the complete Toyota wiring manual for the 2JZ both n/a & TT. I used this document mostly on the computer, searching by name for any signal I was unsure of & verifying its original routing in the donor car. https://docs.google.com/open?id=0BySnYhF5aj65cm50dFFhOVlWUGc Edited August 31, 2012 by darrenhopper (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.