Jamesc183 Posted August 10, 2012 Share Posted August 10, 2012 (edited) Wats needed for the above swap apart from the obvious calipers an discs? Is this a straight swap Or do I need a different master cylinder etc? ThanksJC Edited August 10, 2012 by Jamesc183 (see edit history) Link to comment Share on other sites More sharing options...
David P Posted August 10, 2012 Share Posted August 10, 2012 (edited) Double post. Edited August 10, 2012 by David P (see edit history) Link to comment Share on other sites More sharing options...
David P Posted August 10, 2012 Share Posted August 10, 2012 It depends how anal you're going to be about it. Discs, callipers prune back-plates and go. Or Also fit larger back-plates and swap master cylinder. Link to comment Share on other sites More sharing options...
Nic Posted August 10, 2012 Share Posted August 10, 2012 (edited) Front calipers, discs, brake pads and pad fitting kit. Rear calipers, discs, brake pads and pad fitting kit. They are a straight swap although as said you'll either need to trim, remove or replace the rear dust shield to allow clearance for the larger discs. The larger brake calipers, particularly the fronts also need more wheel clearance between the back of the spokes and the front of the caliper. Edited August 10, 2012 by Nic (see edit history) Link to comment Share on other sites More sharing options...
rallly Posted August 13, 2012 Share Posted August 13, 2012 Sounds good, how difficult is it to change the rubber brake hoses to SS goodridge ones?? Link to comment Share on other sites More sharing options...
Shane Posted August 13, 2012 Share Posted August 13, 2012 Well you live and learn. I have always thought the import brakes were all the same between NAs and TTs and it was only the UK spec ones that where larger? Link to comment Share on other sites More sharing options...
David P Posted August 13, 2012 Share Posted August 13, 2012 The "U.K." spec brakes were an option for J spec-ers. Link to comment Share on other sites More sharing options...
Shane Posted August 13, 2012 Share Posted August 13, 2012 The "U.K." spec brakes were an option for J spec-ers. I see. But the OP didnt say if the TT brakes he wanted to use were the larger ones or stock TTs. If they were stock JDM TTs then they would be a straight fit I think? Link to comment Share on other sites More sharing options...
David P Posted August 13, 2012 Share Posted August 13, 2012 Yes they would because they're one and the same. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now