RB-GTE Posted August 8, 2012 Share Posted August 8, 2012 So I bought a Supra which same with some kind of wing, I then bought a TRD replica wing, and it did not fit. At first I thought it was a bad copy... but then taking a closer look, It looks like my Supra was factory wingless and just had the holes drilled to specifically fit just that spoiler it previously had. So I wanted to get my bodyman to weld those current holes shut... and I'll have him make some new ones to factory spec. I want it pin point in the exactly same spot like OEM. Does anyone know the best way around to doing this? I don't want to take a guess and just pop some random holes in the trunk Link to comment Share on other sites More sharing options...
Tyson Posted August 8, 2012 Share Posted August 8, 2012 Is there no way you can get hold of another boot lid to take measurements from ? Where abouts are you located ? I am sure there is someone who can whip there spoiler off to show you. Link to comment Share on other sites More sharing options...
welshbuddy Posted August 8, 2012 Share Posted August 8, 2012 Never heard of a wingless supra as stock ( or is that just me) Link to comment Share on other sites More sharing options...
David P Posted August 8, 2012 Share Posted August 8, 2012 Supra rear hatches are cheap as chips, just get another. Link to comment Share on other sites More sharing options...
RB-GTE Posted August 8, 2012 Author Share Posted August 8, 2012 derp.. did not think of that I think measuring the distance of the holes and how far they sit away from the quarter pannel shouldn't be that hard to measure. Only part is how far it will need to sit back going vertically.. but I should be able to figure that out. Link to comment Share on other sites More sharing options...
Nic Posted August 8, 2012 Share Posted August 8, 2012 Supra rear hatches are cheap as chips, just get another. That'd be the easiest and probably the cheapest solution. Link to comment Share on other sites More sharing options...
Abz Posted August 8, 2012 Share Posted August 8, 2012 Supra rear hatches are cheap as chips, just get another. That'd be the easiest and probably the cheapest solution. This. Infact RobD was giving one away recently, might be worth checking if he still has it. Link to comment Share on other sites More sharing options...
RB-GTE Posted August 8, 2012 Author Share Posted August 8, 2012 I don't live in the UK so it might be more expensive here. Link to comment Share on other sites More sharing options...
RB-GTE Posted October 20, 2012 Author Share Posted October 20, 2012 Anyone here with a wingless Supra that still have the factory holes in place ? or even better yet any pictures? I had the holes weldned shut and I'd like to mount my TRD spoiler. Link to comment Share on other sites More sharing options...
Dnk Posted October 20, 2012 Share Posted October 20, 2012 I can take measurements from my spare tailgate, it wont be till early to mid next week though Link to comment Share on other sites More sharing options...
RB-GTE Posted October 21, 2012 Author Share Posted October 21, 2012 No worries! thanks though! I was able to call a friend which is willing to take his OEM wing off for me. Should have something to go off of. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now