listy Posted August 8, 2012 Share Posted August 8, 2012 Cheers pal, Was thinking 18" alloys what mm can it be lowered with no rubbing ect All depends on offset, width and tyre wall mate to be honest. Nice looking UK you got there too Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted August 8, 2012 Author Share Posted August 8, 2012 All depends on offset, width and tyre wall mate to be honest. Nice looking UK you got there too Cheers I will have a look on the Internet see if any appeal to me and I will post the spec to see if anyone will know weather they will fit or not. Having the uk big breaks and all. Quote Link to comment Share on other sites More sharing options...
listy Posted August 8, 2012 Share Posted August 8, 2012 Generally people go for 8.5 fronts 9.5/10 rears (widths) I think. 114x5 stud pattern is what you want. And an offset et35. Hope this helps. I'm about to order a set of 8.5 front 9.5 rear, 114x5 et35 to give you some kind of idea what to look for. Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted August 8, 2012 Author Share Posted August 8, 2012 Generally people go for 8.5 fronts 9.5/10 rears (widths) I think. 114x5 stud pattern is what you want. And an offset et35. Hope this helps. I'm about to order a set of 8.5 front 9.5 rear, 114x5 et35 to give you some kind of idea what to look for. I cheers mate nice one cheers for info Quote Link to comment Share on other sites More sharing options...
Josh Posted August 8, 2012 Share Posted August 8, 2012 Is it a bit high at the back? Might just be the tyres or pics. Looking good Quote Link to comment Share on other sites More sharing options...
scotty71 Posted August 8, 2012 Share Posted August 8, 2012 arghhhhhhhhh dildo's nice ride though Quote Link to comment Share on other sites More sharing options...
safcdixon Posted August 9, 2012 Share Posted August 9, 2012 Looks a like you got a mint example there dude arghhhhhhhhh dildo's Nowt wrong with dildos Quote Link to comment Share on other sites More sharing options...
NathWraith Posted August 9, 2012 Share Posted August 9, 2012 Get yourself a set of these: http://www.ebay.co.uk/itm/110859892604?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 and these http://www.ebay.co.uk/itm/270451419539?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_1447wt_1163 to sort out the horrible orange side indicators I have them on mine, next job is facelift fronts, as the tango effect dates the car IMO Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted August 9, 2012 Author Share Posted August 9, 2012 Get yourself a set of these: http://www.ebay.co.uk/itm/110859892604?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 and these http://www.ebay.co.uk/itm/270451419539?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_1447wt_1163 to sort out the horrible orange side indicators I have them on mine, next job is facelift fronts, as the tango effect dates the car IMO Ha a was just looking on eBay last night for these cheers pal are they the ones that replace with no modding . Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted August 9, 2012 Author Share Posted August 9, 2012 arghhhhhhhhh dildo's nice ride though LoL what's with the "dildos" comment had that loads. Even off me friends. Ha a might have to invest in a new bumper but a like the original :-/ Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted August 9, 2012 Author Share Posted August 9, 2012 Is it a bit high at the back? Might just be the tyres or pics. Looking good Josh am crap mate with a camera :-/ might just be that Quote Link to comment Share on other sites More sharing options...
Peter P Posted August 9, 2012 Share Posted August 9, 2012 The dildo's term is the affectionate nickname for the headlight washers mate. I don't think they look that bad personally. If you do change the alloys & bumper, I'd keep the originals in storage mate. Not many of these UK spec models around, so worth preserving the originality. Best of luck with it though, looks very tidy! Quote Link to comment Share on other sites More sharing options...
NathWraith Posted August 9, 2012 Share Posted August 9, 2012 Ha a was just looking on eBay last night for these cheers pal are they the ones that replace with no modding . Yes mate, the side repeaters just clip off. However the bulb inside is just a clear bulb which shines ornage because of the ornage casing. So those silver amber flashing bulbs look awesome as they flash amber but look nice and clean with no "fried egg" look. Can be done in under 5 minutes LoL what's with the "dildos" comment had that loads. Even off me friends. Ha a might have to invest in a new bumper but a like the original :-/ Man I get the same. Considering a new bumper at some point but UK specs are rare so I don't want to remove one of the extra features. Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted August 11, 2012 Author Share Posted August 11, 2012 Yes mate, the side repeaters just clip off. However the bulb inside is just a clear bulb which shines ornage because of the ornage casing. So those silver amber flashing bulbs look awesome as they flash amber but look nice and clean with no "fried egg" look. Can be done in under 5 minutes Man I get the same. Considering a new bumper at some point but UK specs are rare so I don't want to remove one of the extra features. Just ordered the side repeaters they definitely will look better than stock ones Yeah if I do upgrade the bumper it will just go in garage. Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted August 11, 2012 Author Share Posted August 11, 2012 The dildo's term is the affectionate nickname for the headlight washers LOL thought it meant the washer jets ha Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted August 15, 2012 Author Share Posted August 15, 2012 Got these ordered and fit them today : ) makes the car look a lot newer! if that makes sense... https://jza80.mkivsupra.net/imports/2012/08/255.jpg[/img]"] https://jza80.mkivsupra.net/imports/2012/08/256.jpg[/img]"] Quote Link to comment Share on other sites More sharing options...
NathWraith Posted August 15, 2012 Share Posted August 15, 2012 Good stuff man Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted August 15, 2012 Author Share Posted August 15, 2012 Cheers nath for the link mate. You were correct in saying they are easy to fit took like 3 mins! Quote Link to comment Share on other sites More sharing options...
NathWraith Posted August 16, 2012 Share Posted August 16, 2012 Cheers nath for the link mate. You were correct in saying they are easy to fit took like 3 mins! No worries man. Looks so much cleaner doesn't it. Just need facelift front indicators to match. Quote Link to comment Share on other sites More sharing options...
shaz2010 Posted October 22, 2012 Author Share Posted October 22, 2012 I'm on the hunt for some new alloys I went to revolution (gateshead) and had a look around! Not a lot that I like but these caught my eye, http://flic.kr/p/dmXnhB Either these or the gloss black team dynamics pro race 1.2! Both are staggered 18" in size and 9" on the back and 8" on the front. What do you's think. Quote Link to comment Share on other sites More sharing options...
benkei Posted October 22, 2012 Share Posted October 22, 2012 I'm a big fan of these Quote Link to comment Share on other sites More sharing options...
DaveR Posted October 22, 2012 Share Posted October 22, 2012 Nice looking car, matey. DEFINITELY needs lowering a touch, I reckon. Be bold on the wheels - 10" rear, 9" front. They'll fit with no issues with the right offset. Check out the Rota range - they were practically MADE for the Supra! Edit: Just looked at your photo and you're way ahead of me! Good call! Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted October 22, 2012 Share Posted October 22, 2012 If you want multi spoke 18s, I'd look for a cheapish set of the GS300 sport/TTE wheels and get them refurb'd in gunmetal. They're the correct size and offset. Quote Link to comment Share on other sites More sharing options...
Havard Posted October 22, 2012 Share Posted October 22, 2012 Are we having this discussion on two different threads? Quote Link to comment Share on other sites More sharing options...
FOSTA Posted October 22, 2012 Share Posted October 22, 2012 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.