Removing rear wiper parts - how?

[R Black]

I recently, swapped over my tailgate for a better one, anyhow apart from the fact all that glass makes it all very heavy, the only thing left to swap over, is where the rear wiper goes the big nut, and the driveplate That connects to the wiper motor. Any tips or just be brutal, doesn't matter about the tailgate its on.

Edited July 27, 2012 by Gaz6002
title adjusted (see edit history)

[Gaz6002]

I've changed your title to reflect what you're actually asking. It makes it easier for others to find this thread in the future, and makes people more likely to help you out.

 

Try a bit harder next time

[JakeG]

Take the wiper arm off first then you can remove the big nut(think its a 28 iirc) then remove the pastic cover inside of the bootlid, and there will be 3 bolts holding the wiper motor in place, disconect any wires and your done

[R Black]

Thanks Gaz.

 

Hi Jake u have a boot lid with just the nut and the driveplate under it, not much to grip from the underside to allow me to get the nut off. Would it be easier with the motor attached, didn't think that would hold it, as its very tight.