JohnA Posted August 9, 2005 Share Posted August 9, 2005 Does anyone know where I can find axle stands with a profile like this? The ones I've got are all flat, and I don't trust them to hold the supra on my drive (it isn't flat) Thanks guys Link to comment Share on other sites More sharing options...
Miguel Posted August 9, 2005 Share Posted August 9, 2005 TBH i fabbed my own guide heads up out os steel ...but i've also done it from hardwood in the past ....and just fit then on top of normal axle stands...A damn site cheaper than finding OEM axle stands. Link to comment Share on other sites More sharing options...
Animal Posted August 9, 2005 Share Posted August 9, 2005 I just use ordinary flat headed stands. I've done a decat, front & rear suspension over the last 3 weeks and it's been steady as a rock. Migster's idea of wooden blocks would be better if you are uncertain - easier to make fit for a start. Link to comment Share on other sites More sharing options...
JohnA Posted August 9, 2005 Author Share Posted August 9, 2005 Surely the wood would split under the weight, wouldn't it? I haven't got a welder (or space for it) so fabricating is out of the question. I was hoping that maybe there were others available, from motor factors or something... Link to comment Share on other sites More sharing options...
John_M Posted August 9, 2005 Share Posted August 9, 2005 The ones I've got are all flat, and I don't trust them to hold the supra on my drive (it isn't fllat) Wouldn't trust any axle stands on a sloping drive TBH. Link to comment Share on other sites More sharing options...
JohnA Posted August 9, 2005 Author Share Posted August 9, 2005 well I haven't got much choice, it's impossible to lift the car on the passenger side in my garage, it's too blody wide. I've got two supra OEM jacks so that helps, but don't want to leave it standing on stock jacks, it makes me nervous. Link to comment Share on other sites More sharing options...
Paul Posted August 9, 2005 Share Posted August 9, 2005 Wouldn't trust any axle stands on a sloping drive TBH. Link to comment Share on other sites More sharing options...
JohnA Posted August 9, 2005 Author Share Posted August 9, 2005 We're talking 10-15 degrees slope, it's not vertical drop or anything... Link to comment Share on other sites More sharing options...
Paul Posted August 9, 2005 Share Posted August 9, 2005 We're talking 10-15 degrees slope, it's not vertical drop or anything... LOL ! OK, don't sound so bad, you're the bugger getting underneath it so I guess you're happy then that's fine. What about making some blocks from marine ply or any good plywood, no chance of it splitting as it's opposite grain per layer and bonded. I made some ages ago and they work fine, look well knackered now but not split. Paul Link to comment Share on other sites More sharing options...
JohnA Posted August 9, 2005 Author Share Posted August 9, 2005 marine ply...yeah, maybe it's worth giving it a shot. Link to comment Share on other sites More sharing options...
Miguel Posted August 9, 2005 Share Posted August 9, 2005 Surely the wood would split under the weight, wouldn't it? Depends what way you go on the grain ..ooer missus...Or as kindly sugested marine ply ..anyone tell i'm not a woodsman. Link to comment Share on other sites More sharing options...
MONKEYmark Posted August 10, 2005 Share Posted August 10, 2005 i bought a set of 2 ton stands from lidel for £10 Link to comment Share on other sites More sharing options...
JohnA Posted August 10, 2005 Author Share Posted August 10, 2005 Yes Mark, but did they have a profile like the one above? The Lidl ones are flat on top, aren't they? Link to comment Share on other sites More sharing options...
merckx Posted August 10, 2005 Share Posted August 10, 2005 You only need small wooden blocks, they don't need to be any bigger than the cradle on the axel stand. Just like in the pic above, it would be even better to use a couple of small bolts to stop the blocks moving around. If they're a snug fit on the axel stand like they should there's no way they're going to split, you need a slot cut in obviously to fit over the vertical flange which is under the sill. Link to comment Share on other sites More sharing options...
MONKEYmark Posted August 10, 2005 Share Posted August 10, 2005 Yes Mark, but did they have a profile like the one above? The Lidl ones are flat on top, aren't they?dont think i would use axel stands in that position myself.i have worked under car before with just a sissor jack and a wheel under car. so i just bought a set of axel stands for better safety than a sissor jack. cant you work on car out of garage as your garage has to be smallest garage in england. Link to comment Share on other sites More sharing options...
JohnA Posted August 10, 2005 Author Share Posted August 10, 2005 .... cant you work on car out of garage as your garage has to be smallest garage in england. The garage is wider than average Mark. With the Calibra I had no problems at all, and with the Astra I can run rings around it. The supra is just too feken wide. That's why it's so stable at speed I guess, can't have everything eh? The incline is outside the garage, obviously, when I need to fully open both doors or raise the passenger side (like change the frikin oil filter, that I can't access from the top, neither for love nor money) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now