cooke Posted July 15, 2012 Share Posted July 15, 2012 On a scale of 1 to 10 how hard is this to do and is there anything i should no before unbolting everything n taking it out Quote Link to comment Share on other sites More sharing options...
JamieP Posted July 15, 2012 Share Posted July 15, 2012 Easy enough if you have some basic tools and a jack/axle stands, you need a 12mm allen socket for the back of the diff and 10mm allen for the drivshafts, Prop bolts are 17mm iirc. They are pretty heavy, keep the jack under the diff as you unbolt it, that way you can lower it down on the jack and pull it out, couple of hours to swap. Quote Link to comment Share on other sites More sharing options...
cooke Posted July 15, 2012 Author Share Posted July 15, 2012 Does anything need to go back in the exact same position it came out, (do i need to mark were anything is) Quote Link to comment Share on other sites More sharing options...
JamieP Posted July 15, 2012 Share Posted July 15, 2012 No. Quote Link to comment Share on other sites More sharing options...
dr_jekyll Posted July 15, 2012 Share Posted July 15, 2012 They are pretty heavy, keep the jack under the diff good advice. and dont lay directly underneth it or youl end up with a nose like me Quote Link to comment Share on other sites More sharing options...
cooke Posted July 15, 2012 Author Share Posted July 15, 2012 (edited) Lol thanks for the advise, i had a look but im gonna wait till tuesday n get my uncle to help me, thinkin it will be better if its a 2 man job, plus he a mechanic lol, i'll let u's no how i get, im also just going to u's the same stretch bolts n put locktight on n im think it should be ok Edited July 15, 2012 by cooke (see edit history) Quote Link to comment Share on other sites More sharing options...
cooke Posted July 22, 2012 Author Share Posted July 22, 2012 Need the torque setting for supra diff case, i had it opened to make sure it was an a01b and im putting back together and putting it in now, if you know the torque settings for any of the bolts that i would need to know it would be helpfull to Quote Link to comment Share on other sites More sharing options...
JamieP Posted July 22, 2012 Share Posted July 22, 2012 35ftlb for the diff cover iirc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.