wallis Posted July 13, 2012 Share Posted July 13, 2012 (edited) As many of u guys know I've had my car to bits doing the single conversion and after what's probably the best part of two years ryan's doing the final map on Tuesday! I aimed for a good quality single set up with the least amount of lag and maximum torque, basically a 500rwhp street set up! After thousands being spent fingers crossed on Tuesday I'll have the results I've been after! I will prob have one of the smallest single turbos out there but have one of the quickest cars of the mark, it's been pretty painful to say the least..... Roll on tuesday that's all I can say ;-) I'll keep u posted on the results, but I'm well excited to see if we get close to the 600bhp with all the mods I've done ;-) it's honestly become a personal challenge from all the negative response I've had from using such a small turbo, hopefully I'll finally prove people wrong with the crazy torque results....lol Edited July 17, 2012 by wallis (see edit history) Quote Link to comment Share on other sites More sharing options...
johnny g Posted July 13, 2012 Share Posted July 13, 2012 Go for it mate I bet it'll be a hoot to drive on the road Quote Link to comment Share on other sites More sharing options...
Kaan W Posted July 13, 2012 Share Posted July 13, 2012 Good on you mate I hope it goes well for you, it must feel crazy Quote Link to comment Share on other sites More sharing options...
hodge Posted July 13, 2012 Share Posted July 13, 2012 Hope it all goes well for you Wallis. Proving people wrong is better than what you achieve sometimes Quote Link to comment Share on other sites More sharing options...
Josh Posted July 13, 2012 Share Posted July 13, 2012 Hope you get everything you want from it. Make sure to get some videos and pictures of the tiny turbo Quote Link to comment Share on other sites More sharing options...
Luxluc Posted July 13, 2012 Share Posted July 13, 2012 Fingers crossed mate. Get Ryan turn up that boost to 2 bar .. and you'll be delighted Quote Link to comment Share on other sites More sharing options...
wallis Posted July 13, 2012 Author Share Posted July 13, 2012 Fingers crossed mate. Get Ryan turn up that boost to 2 bar .. and you'll be delighted Jokes aside I know my set up in japan has been good for over 600bhp, it's all been down to the boost levels! On my last map Ryan had pretty big concerns about my EGTs after 1.4bar so wasn't happy with the set up, ive now rectified these issues and hope we get closer to 1.6bar+! I know my set ups been good for 1.8 on similar cars around the world, but we will see ;-) Quote Link to comment Share on other sites More sharing options...
Noz Posted July 13, 2012 Share Posted July 13, 2012 Out of interest mate, whats the inducer wheel size on the turbo and your ar housing? I'll look it up if you can't remember was just curious Quote Link to comment Share on other sites More sharing options...
JamieP Posted July 13, 2012 Share Posted July 13, 2012 Good luck with it, what have you changed? Quote Link to comment Share on other sites More sharing options...
Littler Posted July 13, 2012 Share Posted July 13, 2012 Good luck Get some vids Quote Link to comment Share on other sites More sharing options...
wallis Posted July 13, 2012 Author Share Posted July 13, 2012 (edited) Good luck with it, what have you changed? Changed the complete exhaust system, had a custom downpipe section fabricated so it's pretty much a straight through system with zero restriction, also gone for a water injection system to aid the higher boost levels! Good luck Get some vids Wish I could but I'm away on holiday and my cars in the safe hands of ash and Ryan at garage 786 ;-) Edited July 13, 2012 by wallis (see edit history) Quote Link to comment Share on other sites More sharing options...
Littler Posted July 13, 2012 Share Posted July 13, 2012 Wish I could but I'm away on holiday and my cars in the safe hands of ash and Ryan at garage 786 ;-) May have to nip down as I'm in leicester on Tuesday Quote Link to comment Share on other sites More sharing options...
JamieP Posted July 13, 2012 Share Posted July 13, 2012 Changed the complete exhaust system, had a custom downpipe section fabricated so it's pretty much a straight through system with zero resection, also gone for a water injection system to aid the higher boost levels! That will help, i cant see a 0.2 bar raise in boost doing 130bhp though, when i had a T67 every 0.1 bar made me about 30bhp iirc. Quote Link to comment Share on other sites More sharing options...
wallis Posted July 13, 2012 Author Share Posted July 13, 2012 (edited) Out of interest mate, whats the inducer wheel size on the turbo and your ar housing? I'll look it up if you can't remember was just curious The HKS gt30r is actualy a hybrid with a 56mm turbine and gt37 compressor, I'm running a 1.06 ar housing to prevent any surge which has been superb with the HKS 264 in/ex cams, the low down torque is just unreal! That will help, i cant see a 0.2 bar raise in boost doing 130bhp though, when i had a T67 every 0.1 bar made me about 30bhp iirc. Yeah I'm prob being too optimistic Jaime, but ash and Ryan both think I'm good for at least another 50bhp+ from the existing map, I'm just hoping the water inj will do the job to allow the boost increase ;-) Edited July 13, 2012 by wallis (see edit history) Quote Link to comment Share on other sites More sharing options...
Abz Posted July 13, 2012 Share Posted July 13, 2012 Good luck!! You have to bring this to the next SupraPod though Quote Link to comment Share on other sites More sharing options...
wallis Posted July 13, 2012 Author Share Posted July 13, 2012 Good luck!! You have to bring this to the next SupraPod though Hey up abz, I was gutted I couldn't make it this year, it was my little boys 1st birthday so I had no chance :-( Quote Link to comment Share on other sites More sharing options...
Noz Posted July 13, 2012 Share Posted July 13, 2012 Thanks for the info dude. That turbo sounds awesome and your setup looks nice, I hope you reach your goals. Quote Link to comment Share on other sites More sharing options...
Abz Posted July 13, 2012 Share Posted July 13, 2012 Hey up abz, I was gutted I couldn't make it this year, it was my little boys 1st birthday so I had no chance :-( To be honest that is a bit more important Looking forward to seeing this run, with Ryan's magic I am expecting good things Quote Link to comment Share on other sites More sharing options...
wallis Posted July 13, 2012 Author Share Posted July 13, 2012 To be honest that is a bit more important Looking forward to seeing this run, with Ryan's magic I am expecting good things Me to fingers crossed mate ;-) Quote Link to comment Share on other sites More sharing options...
wallis Posted July 14, 2012 Author Share Posted July 14, 2012 Abz here's a little vid with the new exhaust and a safe map of 477 bhp and 500ftlb of torque.....i think i let my foot off at about 120 moomins ;-) http://i1257.photobucket.com/albums/ii507/mattshrewd/43b53d66.mp4 You get the idea of what it's like ;-) Quote Link to comment Share on other sites More sharing options...
wallis Posted July 14, 2012 Author Share Posted July 14, 2012 Just reading through the thread realised one of my posts didn't work from my i phone ? cheers guys for the feedback and hodge I agree fella ;-) Quote Link to comment Share on other sites More sharing options...
wallis Posted July 16, 2012 Author Share Posted July 16, 2012 Just had a nice conversation with Ryan about tomorrow, he's done some research on the gt30r from the states i think and is confident we should get close to 1.9bar of boost on my set up and 560bhp!!! The torque I'm guessing is going to be higher than the bhp so I'm pretty excited to say the least, it's crazy enough now running 477bhp!! Will keep u posted on the final results later tomorrow ;-) Quote Link to comment Share on other sites More sharing options...
dr_jekyll Posted July 16, 2012 Share Posted July 16, 2012 1.9 bar ? i would have thaught you would see a bit more than 560bhp Quote Link to comment Share on other sites More sharing options...
wallis Posted July 16, 2012 Author Share Posted July 16, 2012 1.9 bar ? i would have thaught you would see a bit more than 560bhp It's such a small turbo it's legs will fall off.....but the torque and instant spool is going to be crazy!! Quote Link to comment Share on other sites More sharing options...
johnny g Posted July 16, 2012 Share Posted July 16, 2012 Good luck for tomorrow chief. Post up the results as they happen! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.