Kaan W Posted July 6, 2012 Share Posted July 6, 2012 Ok so while stripping down my supra I keep coming accross things that I havent got a clue what they are. I like to know whats what and keep clutter to a minimum. Here is just some of the stuff I have cleared out [sHOCK][/sHOCK] - The pictures below are things I need help from people to identify what it is and whether anyone else has this and if its needed or not ? Part 1 - Located behind dash Part 2 - Also behind dash Part 3 - behind passenger side rear quarter plastics (has some sort of antenna). Part 4 - Hanging loose in engine bay but still connected to part of the dash loom?? If anyone can help I would much appreciate it as I hate clutter and want to get rid of everything thats not needed. Thanks Quote Link to comment Share on other sites More sharing options...
RobUK Posted July 6, 2012 Share Posted July 6, 2012 Part 1 - Nokia Hands Free Controller Part 2 - Speaker for above Quote Link to comment Share on other sites More sharing options...
Kaan W Posted July 6, 2012 Author Share Posted July 6, 2012 Part 1 - Nokia Hands Free Controller Part 2 - Speaker for above So this is an aftermarket device for a nokia phone? So this can go yeah Quote Link to comment Share on other sites More sharing options...
RobUK Posted July 6, 2012 Share Posted July 6, 2012 Yeah just be careful when you remove it as it should also have a microphone and antenna unless you have taken them out already... Quote Link to comment Share on other sites More sharing options...
Kaan W Posted July 6, 2012 Author Share Posted July 6, 2012 Yeah just be careful when you remove it as it should also have a microphone and antenna unless you have taken them out already... Oh ok. Can I remove the loom its not connected to the ecu or anything? Cheers Quote Link to comment Share on other sites More sharing options...
RobUK Posted July 6, 2012 Share Posted July 6, 2012 Usually wired into the stereo for mute and power... That's about all but then it just depends who fitted it :s Quote Link to comment Share on other sites More sharing options...
Nic Posted July 6, 2012 Share Posted July 6, 2012 3. http://www.innovatemotorsports.com/products.php Quote Link to comment Share on other sites More sharing options...
Kaan W Posted July 6, 2012 Author Share Posted July 6, 2012 3. http://www.innovatemotorsports.com/products.php So as my AFR gauge wasnt plugged in to anything because of the syvecs, this can just come out right? Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted July 6, 2012 Share Posted July 6, 2012 Yeah innovate wideband loom. If its not plugged into anything, out it comes. Quote Link to comment Share on other sites More sharing options...
Kaan W Posted July 6, 2012 Author Share Posted July 6, 2012 Yeah innovate wideband loom. If its not plugged into anything, out it comes. The skinny wires on the other end were basically plugged into the afr gauge but the other chunky connector end, nothing. Dont know what that was suppose to plug into... Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted July 6, 2012 Share Posted July 6, 2012 The fat end should plug into the loom from the wideband sensor Quote Link to comment Share on other sites More sharing options...
Kaan W Posted July 6, 2012 Author Share Posted July 6, 2012 The fat end should plug into the loom from the wideband sensor Well its out now so thats more clutter gone Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.