dr_jekyll Posted July 5, 2012 Share Posted July 5, 2012 could anybody point me towrds the the peroper way of plumbing in an ebc to the stock 2 way twin system. i have been reading alot into this and have encounterd a few horror stories of this being done incorrectly and fubaring the sequential system and buggering turbos. i have also been told that plubing into the stock sytem for an ebc is generally a bad idea, any light on this would be great , cheers, Link to comment Share on other sites More sharing options...
ashbuster Posted July 5, 2012 Share Posted July 5, 2012 it should be plumbed into the front mate maybe not the same controller but it shows you where to plumb it in http://www.mkiv.com/techarticles/blitz_dsbc/index.html Link to comment Share on other sites More sharing options...
SupraD06 Posted July 5, 2012 Share Posted July 5, 2012 Block of where it shows in the pics and then plumb in the EBC as follows http://www.mkiv.com/techarticles/avc-r/install/diagram.jpg Link to comment Share on other sites More sharing options...
ashbuster Posted July 5, 2012 Share Posted July 5, 2012 Block of where it shows in the pics https://www.mkivsupra.net/vbb/attachment.php?attachmentid=117417&d=1284901006 https://www.mkivsupra.net/vbb/attachment.php?attachmentid=117418&d=1284901006 and then plumb in the EBC as follows http://www.mkiv.com/techarticles/avc-r/install/diagram.jpg yeah that diagram shows it better, you should easily figure it out between that pik and the guide mate Link to comment Share on other sites More sharing options...
dr_jekyll Posted July 5, 2012 Author Share Posted July 5, 2012 thank you gents Link to comment Share on other sites More sharing options...
ashbuster Posted July 5, 2012 Share Posted July 5, 2012 anytime bud Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now