DJT88 Posted June 23, 2012 Share Posted June 23, 2012 (edited) Hi all, Recently I've bought a 'new' door control module because I've been having problems with the passenger door not locking. Buy I'm having trouble reaching it. How to remove the vent in the picture. I can't possibly get acces through the hole I've created by removing the glove box. Some1 must have done this before but can't find a how to ... Cheers Edited June 23, 2012 by DJT88 fix title (see edit history) Quote Link to comment Share on other sites More sharing options...
Westy Posted June 23, 2012 Share Posted June 23, 2012 You can change the title in advanced mate. I've never removed any of the dash but I'd look up the how to thread relation to replacing the heater matrix for a run down on this. Quote Link to comment Share on other sites More sharing options...
DJT88 Posted June 23, 2012 Author Share Posted June 23, 2012 thanks, but I don't want to end up doing this (see picture) just to replace the door module which might not even fix my problem: Quote Link to comment Share on other sites More sharing options...
DJT88 Posted June 23, 2012 Author Share Posted June 23, 2012 (edited) Okay, I might be getting somewhere now. I've managed to remove another piece of the air piping(picture). Now there's loads more space. I've managed to reach it, tried replacing it but it didn't matter. Passenger door is still not locking (only unlocking works like with the other module). Problem is probably in the door then... but which one is the next challenge Edited June 23, 2012 by DJT88 added result. (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.