Rob_Mitchell Posted June 24, 2012 Share Posted June 24, 2012 Fuse box in the boot here too, best mod on the car and easy to check fuse's. mammoth ammount of work though so thanks turtleshead Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted June 24, 2012 Author Share Posted June 24, 2012 how much are we talking about so guys to have a wire tuck done lol ? Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted June 24, 2012 Share Posted June 24, 2012 how much are we talking about so guys to have a wire tuck done lol ? Ha I was just thinking the same, no ones actualy said! Oh and note to self the igniter DOES need earthing to the car!!! Gave my self issues re locating this thinking it had its own earth! Turney key and no startey! Quote Link to comment Share on other sites More sharing options...
spikedjack Posted June 24, 2012 Share Posted June 24, 2012 It's labour intensive so whatever someone's time is worth then a small amount for materials. A fair bit if I was doing it for someone! Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted June 24, 2012 Author Share Posted June 24, 2012 I would have no bothers giving the car to someone and they could take their time doing it, i am in no rush with my supra, i want it all done right and i know it wont be done over night etc pity I dont live in the uk as i could get one of you chaps to do it Quote Link to comment Share on other sites More sharing options...
FOSTA Posted June 24, 2012 Share Posted June 24, 2012 (edited) how much are we talking about so guys to have a wire tuck done lol ? If your paying for Somone to tuck the bay for you, the price will vary on how far you want to take it. I would take a guess that if you just wanted the 2 looms tucked on both side into the wings then I would think around the price of £280-£350, then a battery relocate into boot I would say around £100 labor and £200.00 for a dry cell battery plus parts, fuse box is a big job so I'm going to take a hit at saying maby around £250ish and so on. A full bay wire tuck including fuse box, battery, igniter, coil (NA), loom I would say you could be looking at around £800-£900 depending on who does it! But this is just a guess at what I think it could cost so I could be way off lol. If you do it your self it cost me around £70.00 for enough wires to relocate fuse box, £40.00 for zero gauge amp kit to relocate battery (eBay), I still need a dry cell battery but £200.00 there. Around £40.00 in bits and bobs like loom tape, lots of heat shrink, cable ties, etc. So It's cost me around £150.00 so far but still need a battery, and hours and hours of work. Ps: I forgot to mention I also deleted my abs and that was expencive as I ran into a few problems doing it my self and it cost me ££££'s Edited June 24, 2012 by FOSTA (see edit history) Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted June 24, 2012 Author Share Posted June 24, 2012 With regards to your battery, can you not just use your existing battery ? Quote Link to comment Share on other sites More sharing options...
FOSTA Posted June 24, 2012 Share Posted June 24, 2012 With regards to your battery, can you not just use your existing battery ? No mate as fumes from the charging cycle will DISTROY YOU!!!! Pmsl No you can't mate, if it's going to be in the cabin you need a dry cell battery wich won't give off toxic fumes Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted June 24, 2012 Author Share Posted June 24, 2012 Thanks for that mate cause i honestly did not know that as i never went about relocating a battery to the boot before Quote Link to comment Share on other sites More sharing options...
FOSTA Posted June 24, 2012 Share Posted June 24, 2012 Thanks for that mate cause i honestly did not know that as i never went about relocating a battery to the boot before Your welcome mate, nice to know I could of saved a life today Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted June 24, 2012 Share Posted June 24, 2012 I think you be looking more like £350.00 for just the fuse box in the boot. Im not going to do anymore wire tucks as you can get in all sorts of trouble and people dont like paying the money... if you want to do it properly get the bays holes welded and then all flushed, but then your looking at ££££ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.