monsween Posted May 29, 2012 Share Posted May 29, 2012 Another convert here to bendy ratchet spanners. Some more additions Big half inch breaker bar (2ft at a minimum) Set of impact sockets. Nothing worse than those star socket type things for rounding bolts Blowtorch Bolt extractor set in varying sizes Mash hammer Expensive drill bits. Don't get conned with cheap drill bits I'm sure I'll remember some more later Quote Link to comment Share on other sites More sharing options...
Brothy Posted May 29, 2012 Share Posted May 29, 2012 Hammer and chisel Quote Link to comment Share on other sites More sharing options...
Geo Posted May 29, 2012 Share Posted May 29, 2012 All i need at the Moment since i have no supra (0800 028 2848) LEX auto lease one call, if it breaks i phone them. Quote Link to comment Share on other sites More sharing options...
merckx Posted May 29, 2012 Share Posted May 29, 2012 Mole grips, locking pliers, self grip pliers - they have a few different names. Don't buy the cheap ones as they're rubbish to use, the "Vise-Grip" ones are good. http://www.amazon.co.uk/Vise-Grip-01-10R-Visegrip-Locking/dp/B00004YO5K/ref=sr_1_1?s=diy&ie=UTF8&qid=1338303549&sr=1-1 Quote Link to comment Share on other sites More sharing options...
SupraAyf Posted May 29, 2012 Share Posted May 29, 2012 I have every tool apart from the one needed to complete the job - very frustrating! It happens every time. Quote Link to comment Share on other sites More sharing options...
peter richards Posted May 29, 2012 Share Posted May 29, 2012 fresh air and a bit of dust Quote Link to comment Share on other sites More sharing options...
JamieP Posted May 29, 2012 Share Posted May 29, 2012 Pictures of your tool setup would be nice, will get a couple of mine later. Quote Link to comment Share on other sites More sharing options...
tomgeer Posted May 29, 2012 Share Posted May 29, 2012 Pictures of your tool setup would be nice, will get a couple of mine later. Good shout Jamie, i'll get some posted up in the next couple of days. I love tools Quote Link to comment Share on other sites More sharing options...
SupraStar 3000 Posted May 29, 2012 Share Posted May 29, 2012 Pictures of your tool setup would be nice, will get a couple of mine later. Sorry, but i sniggered at that! LOL Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted May 29, 2012 Share Posted May 29, 2012 (edited) It's Halfords top tool chest line (industrial). It's as good as any other cabinet I've used (including Snap-on) the only downside compared to Snap-on is that the drawers aren't quite as wide. On the plus side it cost me less than a 3rd of an equivalent Snap-on setup. I never appreciated how much of an improvement decent tool storage makes. Everything's to hand and it saves loads of time. Edited May 29, 2012 by j_jza80 (see edit history) Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted May 30, 2012 Share Posted May 30, 2012 I have a mix of all sorts in mine... But all well layed out Quote Link to comment Share on other sites More sharing options...
Caesard Posted May 30, 2012 Share Posted May 30, 2012 My tool box: 6 cans of beer, and a Banzai or top gear magazine for when I take a break from the hard work of drinking the beer :beer: Quote Link to comment Share on other sites More sharing options...
JamieP Posted May 30, 2012 Share Posted May 30, 2012 Mine, could do with a bit of a tidy up Quote Link to comment Share on other sites More sharing options...
tomgeer Posted May 30, 2012 Share Posted May 30, 2012 Here's a sample of mine (just tidied up a bit, excuse the state of the floor paint). My favourite tools of choice include my snap on gun, gas axe and mig welder Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.