Jump to content
The mkiv Supra Owners Club

Quick release Horn Fitment


Jellybean

Recommended Posts

Hey

 

How do I fit a quick release to the Horn, it has a Live and ground but the Horn just has a Live

 

http://www.rhdjapan.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/18856/Image/Normal/Image3.jpg

 

image

 

https://lh6.googleusercontent.com/-gsX7uDDmedc/T7qzhn3Zi7I/AAAAAAAAAms/iuEm6RgAlu4/s776/20120521_184058.jpg

Edited by Jellybean (see edit history)
Link to comment
Share on other sites

The red/black arent live and ground(that would = short circuit, unless it was a bulb) the feed coming out to the button just requires a ground, the button just completes the circuit, you can normally ground 1 side of the button to the wheel hub if you get my meaning.

Link to comment
Share on other sites

Cool thanks guys, I have an spline Quick release on just want to upgrade to a ball lock system but the Ball lock system has two wires , Red and Black

 

The Odula (spline) has just a red wire, so if I just connect one of the wires , on the steering rack and one on the Wheel , all should be good?

Link to comment
Share on other sites

The red/black arent live and ground(that would = short circuit, unless it was a bulb) the feed coming out to the button just requires a ground, the button just completes the circuit, you can normally ground 1 side of the button to the wheel hub if you get my meaning.

 

get you! why does this quick release system have two wires? It seems to be common

 

It is the same in my polo the Horn Button completes the Circuit , the two wires confused me

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.