ripped_fear Posted May 21, 2012 Share Posted May 21, 2012 (edited) Hi all, as some of the dragonballers will know while on the road I was having some car issues. The supra in question is a NA 5 speed, the car was initially getting a build up of pressure as the top rad hose was going very hard and hot, I have kept my speeds low and had to keep the heater on full to keep temps low. Since returning Im not using it unless necessary. The rad hose is now doing the opposite and is sucking in, and seems to be pumping all the coolant into the expansion bottle. On a quick journey today the top rad hose was hot but bottom was cold. So I want to take the thermostat out and change if needed can anyone help as to if its located on the top hose or bottom? Done a search and havent found its location. Thanks Jake Edited May 21, 2012 by ripped_fear (see edit history) Link to comment Share on other sites More sharing options...
carlmhtt Posted May 21, 2012 Share Posted May 21, 2012 I believe it's on the drivers side of the engine just under the exhaust manifold towards the front. It's almost bolted to the block. If its anything like the TT thens you have to move a few bits to gt t it as its tight. Carl Link to comment Share on other sites More sharing options...
TheTurtleshead Posted May 21, 2012 Share Posted May 21, 2012 Follow your bottom rad hose back to where it joins the lower water neck poking out the back of the water pump housing. If you remove the bottom hose, then undo the two 12mm nuts that hold the aforementioned water neck on, the thermostat is located between it and the water pump housing. It will just fall/pull out once you have the water neck off. Link to comment Share on other sites More sharing options...
ripped_fear Posted May 21, 2012 Author Share Posted May 21, 2012 Thanks guys,im going to remove it tommorow or wednesday and run it without one to see if it is the issue. Link to comment Share on other sites More sharing options...
Abz Posted May 21, 2012 Share Posted May 21, 2012 TheTurtleshead said: Follow your bottom rad hose back to where it joins the lower water neck poking out the back of the water pump housing. If you remove the bottom hose, then undo the two 12mm nuts that hold the aforementioned water neck on, the thermostat is located between it and the water pump housing. It will just fall/pull out once you have the water neck off. No wonder you work at SRD you geek!! Link to comment Share on other sites More sharing options...
ripped_fear Posted May 21, 2012 Author Share Posted May 21, 2012 Abz said: No wonder you work at SRD you geek!! i havent got any complaints its the type of simple answer i need Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now