RastaMc Posted May 16, 2012 Share Posted May 16, 2012 Hi guys. I'm planning to put a VVT-i Twin turbo on my 1995 N/A. However, I have now a 5-speed gearbox and I'm afraid this gearbox will not hold the torque coming out of the engine. It isn't possible right now to also buy 6-speed with a diff (this is expensive), so I need to upgrade this gearbox. I was thinking on this.... http://axidworks.com/Supra%20Non%20Turbo%202JZGE%2093%2099%20Ceramic%20Solid Should this help the gearbox a little more to absorb the torque? Or I'm just dreaming?? Thanks guys! Quote Link to comment Share on other sites More sharing options...
Supra Gaz Posted May 16, 2012 Share Posted May 16, 2012 This is becoming a popular upgrade mate and is possibly the most covered thing on the forum. Try whifbitz for the clutch mate, they are tried and tested. Dont forget to post pics when you are done. Quote Link to comment Share on other sites More sharing options...
RastaMc Posted May 16, 2012 Author Share Posted May 16, 2012 Thanks dude! I'll look into the website and search for the rihgt one. Any suggestion? Quote Link to comment Share on other sites More sharing options...
Supra Gaz Posted May 16, 2012 Share Posted May 16, 2012 I would drop Paul a call, he is in the traders bit here, he is a nice bloke and can point you in the right direction. Quote Link to comment Share on other sites More sharing options...
thetrashcanman Posted May 16, 2012 Share Posted May 16, 2012 I would drop Paul a call, he is in the traders bit here, he is a nice bloke and can point you in the right direction. Completely agree with this, when I had the clutch go on my car, I immediately emailed Paul and he was very helpful and quick to respond to said emails too, top bloke Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.