Samurai 20V Posted May 8, 2012 Share Posted May 8, 2012 Hi all. I had the clutch changed on my BPU TT6 recently, I fitted the single plate TRD clutch and pressure plate(incl release bearing) When I changed it the shop said the flywheel is fine, but it has started to develop a rattle. It is mainly on idle, if you press the clutch then the noise disappears.. The gearchange is also getting a bit clunky, especially when cold.. I assume it is the flywheel as it is the only item that was not changed.. Should I just leave it be? Will it effect the car in any way? If I change should I change the clutch plate as well or should I keep the current one (only has abt 5000kms on it).. Thanks in advance. Link to comment Share on other sites More sharing options...
Samurai 20V Posted May 9, 2012 Author Share Posted May 9, 2012 Bump.. Link to comment Share on other sites More sharing options...
mellonman Posted May 9, 2012 Share Posted May 9, 2012 im not 100% about the trd clutch but alot of uprated clutches are noisey and rattle at idle Link to comment Share on other sites More sharing options...
Tyson Posted May 9, 2012 Share Posted May 9, 2012 im not 100% about the trd clutch but alot of uprated clutches are noisey and rattle at idle I was going to say this but it would the perfect excuse to get a lightened one Link to comment Share on other sites More sharing options...
Digsy Posted May 9, 2012 Share Posted May 9, 2012 If you get a lightened flywheel then everything else will rattle Link to comment Share on other sites More sharing options...
Jamesy Posted May 9, 2012 Share Posted May 9, 2012 I have an HKS twin plate clutch with an HKS lightweight flywheel and every time you press the clutch it rattles like a mo-fo!! If anything its a good incentive to change gears even faster Link to comment Share on other sites More sharing options...
Samurai 20V Posted May 9, 2012 Author Share Posted May 9, 2012 Thanks for the replies guys. Its a TRD Single plate clutch, basically a strengthened stock clutch, so it should not rattle at all.. I am just concerned that if the flywheel is on its way out, it might cause other damage? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now