Jellybean Posted May 5, 2012 Share Posted May 5, 2012 (edited) Hopefully Chris Wilson will give us some advice! Using Forza 4, Hockenheim and a stock Supra I dialed in some suspension settings , ( looking for a fast road setup but not too harsh on tires) First up OEM SETUP **Please let me know if this is incorrect FACTORY ALIGNMENT SPECIFICATION Front: • Camber - 0.5 degrees +/- 0.75 -- I used - 5.0 • Caster +3.5 +/- 0.75 degrees -- I used +3.5 • Toe 0.00 +/- 0.80" (2 mm) -- I used 0 Rear: • Camber -1.50 +/- 0.75 -- I used -1.50 • Toe 3.0mm Toe In +/- 0.080" (2mm) -- I used +3 http://www.mkiv.com/techarticles/lance_alignment/index.html http://www.suprastore.com/alignment.html Taughts: I found her hard to handle, alot of steering input required to keep her in the direction you wanted to go, very tail happy ; To sum it up I found it was a good Drift Setup Next up is lance_alignment http://www.mkiv.com http://www.mkiv.com/techarticles/lance_alignment/index.html Front: Camber - 1.0 degrees Caster + 5.0 degrees Toe 0.00 mm Rear: Camber -1.5 degrees Toe in (total) 1.00 mm Taughts: She handled alot better than OEM above, a little oversteer at times but as a n overall package she was progressive in corners , stable on the straights. Only negative point is I would like the front end to feel more planted and go exactly where I want it to go. Dunks Setup Front Camber negative 1 degree Caster 4 degrees Toe in total 0 degrees 7 minutes Rear Camber negative 2 degrees Toe in total 0 degrees 27 minutes Taughts: I found this setup the best out of the three, you can pin point where you want to put the car, stable at high speed , minimal Oversteer ; predictable. As an overall package this is what I would use. How all these fair on tyres I don’t know, I do have issues with the front inner edge on mine so I suspect best option is to stay as close to 0 front toe as with OEM setup to minimise the wear. How accurate Forza is versus real life I don’t know but it’s interesting how she handles with the different settings Edited May 5, 2012 by Jellybean (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.