Kaan W Posted April 26, 2012 Share Posted April 26, 2012 ----BRAND NEW---- !!!!Cost me £650 new + uprated pins worth £60!!!! They are JE 8.5-1 CR, 86.5mm Pistons with rings and locks included! These are the NEW ASYMETRICAL design which are lighter, stronger and have less drag! I think TITAN are now introducing these pistons at a hefty price so grab a bargin... I will also include the uprated 9310 Alloy wrist pins (Cost me £60). ----------£520 ONO---------- I was going to use these pistons in my SERIOUS HP Drag car build as they are some of the best pistons and pins on the market. This is a very good price so grab a bargain before they go on ebay! OFFERS??? PM me for Contact number, Thanks. Link to comment Share on other sites More sharing options...
Al Massey Posted April 26, 2012 Share Posted April 26, 2012 Daft question but what benefit would it be to get these? I'm going NA/T and been advice to update a few parts you have listed Cheers al Link to comment Share on other sites More sharing options...
Kaan W Posted April 26, 2012 Author Share Posted April 26, 2012 Daft question but what benefit would it be to get these? I'm going NA/T and been advice to update a few parts you have listed Cheers al Not daft at all lol, In a NA the rods are weaker and different compression ratio pistons. Whilst changing these parts you would also need to change the bearings and main studs. It all depends on your goals but I brought these parts to give me a platform to grow in the future. What are your main goals for the end build? Link to comment Share on other sites More sharing options...
Al Massey Posted April 26, 2012 Share Posted April 26, 2012 End build It's never ending lol I just want a good platform like yourself to build on and keep building Link to comment Share on other sites More sharing options...
Kaan W Posted April 26, 2012 Author Share Posted April 26, 2012 End build It's never ending lol I just want a good platform like yourself to build on and keep building Exactly what I was going to do lol If thats the case then at some point you will probably be buying these parts at some point! This is a good price if you take all as these parts cost me over £1800. Let me know fella Link to comment Share on other sites More sharing options...
Noz Posted April 26, 2012 Share Posted April 26, 2012 Daft question but what benefit would it be to get these? I'm going NA/T and been advice to update a few parts you have listed Cheers al The bearings and studs would be recommended for any engine rebuild. Pistons and rods are for serious power, 800hp + Link to comment Share on other sites More sharing options...
Kaan W Posted April 26, 2012 Author Share Posted April 26, 2012 Precisely it all depends on your end goals but if you want a rock solid platform for the future then you may as well go for it while the engine is apart. Also NA pistons are different CR for a turbo build. Link to comment Share on other sites More sharing options...
Noz Posted April 26, 2012 Share Posted April 26, 2012 Precisely it all depends on your end goals but if you want a rock solid platform for the future then you may as well go for it while the engine is apart. Also NA pistons are different CR for a turbo build. You need a lower compression for anything over 400bhp on an NA-T and the best effective way for flow in the chamber is to use dished pistons rather than stacking a higher head gasket. Reliability usually points to use TT designed pistons for any NA-T wanting to lower CR. Link to comment Share on other sites More sharing options...
Kaan W Posted April 26, 2012 Author Share Posted April 26, 2012 Yo Reliability usually points to use TT designed pistons for any NA-T wanting to lower CR. So these pistons will be perfect Link to comment Share on other sites More sharing options...
Al Massey Posted April 26, 2012 Share Posted April 26, 2012 The bearings and studs would be recommended for any engine rebuild. Pistons and rods are for serious power, 800hp + What would you recommend Noz? So these pistons will be perfect I'm just making sure I'm going the right route and these will be useful and not just overkill lol Link to comment Share on other sites More sharing options...
Noz Posted April 26, 2012 Share Posted April 26, 2012 The main thing to consider when buying engine components is what are your power goals. I will send you a PM mate so we dont fill up his thread. Link to comment Share on other sites More sharing options...
Kaan W Posted April 26, 2012 Author Share Posted April 26, 2012 Rods sold! Link to comment Share on other sites More sharing options...
dr_jekyll Posted April 26, 2012 Share Posted April 26, 2012 just to point out the na rods arnt weeker than the tt rods. the oem rods are the same in both . thank you, and goodnight Link to comment Share on other sites More sharing options...
Kaan W Posted April 27, 2012 Author Share Posted April 27, 2012 ----thread edit ---- new lower price Link to comment Share on other sites More sharing options...
Kaan W Posted April 28, 2012 Author Share Posted April 28, 2012 ----thread edit---- EVEN LOWER PRICE NEED THESE GONE!!!!!!!!!!! Link to comment Share on other sites More sharing options...
Marco79 Posted April 28, 2012 Share Posted April 28, 2012 Cracking price mate Link to comment Share on other sites More sharing options...
Al Massey Posted April 28, 2012 Share Posted April 28, 2012 £110 - ARP Head studs £90 - ARP Main studs £130 - ACL crank & rod Race bearings STD size I will take these mate : ) Link to comment Share on other sites More sharing options...
Noz Posted April 28, 2012 Share Posted April 28, 2012 Sold to me Link to comment Share on other sites More sharing options...
Kaan W Posted April 28, 2012 Author Share Posted April 28, 2012 I will take these mate : ) Sorry just this second sold mate Link to comment Share on other sites More sharing options...
Al Massey Posted April 28, 2012 Share Posted April 28, 2012 Sold to me Cheeky Sorry just this second sold mate No worries mate Link to comment Share on other sites More sharing options...
Kaan W Posted April 28, 2012 Author Share Posted April 28, 2012 Thanks guys, whos going to take these nice asymetrical pistons from me!!! Link to comment Share on other sites More sharing options...
Kaan W Posted April 29, 2012 Author Share Posted April 29, 2012 Offers anyone??????? NEED THESE GONE!!!!!!!!!! Link to comment Share on other sites More sharing options...
Kaan W Posted April 30, 2012 Author Share Posted April 30, 2012 bump - Even lower price now folks. If they dont sell this week for £515 then i`ll be leaving them on here for the original price of £600.... Thanks. Link to comment Share on other sites More sharing options...
Kaan W Posted May 2, 2012 Author Share Posted May 2, 2012 Bump Link to comment Share on other sites More sharing options...
Kaan W Posted May 3, 2012 Author Share Posted May 3, 2012 Absalute bargain at this price this is now a give away! A few days left guys then normal price... Link to comment Share on other sites More sharing options...
Recommended Posts