Colin-mkiv Posted April 2, 2012 Share Posted April 2, 2012 I did the aircon delete today, I removed the rad, the pipework and the compressor. I used the 6pk1865 belt and all is ok. I didnt see where I might need to make an additional barcket though, as it seems very secure with all of the mountings that I used reinstated. I knocked the spacers out of the mount holes in the aircon compressor flange and reused them where they would have been with the compressor in situ and this seem to have done the trick. can anyone advise me any further? My tensioner has no damper fitted to it. Cheers. Quote Link to comment Share on other sites More sharing options...
Lude Posted April 2, 2012 Share Posted April 2, 2012 (edited) i thaught the same, it does seem very secure, but you HAVE to fit one, aparently after a while it can possibly crack the block some how heres a pic of one, i think its 1JZ though.... that isnt mine, i made one but i dont think its good enough, as now my belt is making a squeeking noise. when the pump is pushed back the squeek goes, so i need a new brace. Edited April 3, 2012 by Lude (see edit history) Quote Link to comment Share on other sites More sharing options...
Colin-mkiv Posted April 2, 2012 Author Share Posted April 2, 2012 Oh, ok.....I'll make one up tommorow then, better safe than sorry is they key! Cheers for that mate... Quote Link to comment Share on other sites More sharing options...
pedrosixfour Posted April 3, 2012 Share Posted April 3, 2012 Now that is something I was completely ignorant to. Must investigate this further. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.