FOSTA Posted April 2, 2012 Share Posted April 2, 2012 Hi guys, I've just noticed my engine management light will not light up when I turn my ignition on? I gussed it would just need a new bulb So I fitted a new one but it still wont light up. So I've re-soldered all the joints incase of any dry joints and it still won't light up? I know the bulb I'm using is good as I've tested it. Is there a fuse that could of blown or somthing? Cheers for any help Quote Link to comment Share on other sites More sharing options...
FOSTA Posted April 2, 2012 Author Share Posted April 2, 2012 bump Quote Link to comment Share on other sites More sharing options...
Noz Posted April 2, 2012 Share Posted April 2, 2012 I had issues with the soldering. Try and wobble the connector around to see if the fault has travelled further down the line. Quote Link to comment Share on other sites More sharing options...
skyline1 Posted April 2, 2012 Share Posted April 2, 2012 It was only yesterday my mate told me about this problem with the boards on the supra's, i dont know the answer to your question bud but i hope you find out. i take it if the engine management light failed it could also happen with the oil light?. Quote Link to comment Share on other sites More sharing options...
FOSTA Posted April 2, 2012 Author Share Posted April 2, 2012 I had issues with the soldering. Try and wobble the connector around to see if the fault has travelled further down the line. Yeah I've resolderd all the joints mate, all the outher bulbs work fine it's just the ecu light? I've also checked the connector plug and all looks fine as far as I can see. So now I'm thinking is there also a fuse for this bulb? Quote Link to comment Share on other sites More sharing options...
FOSTA Posted April 2, 2012 Author Share Posted April 2, 2012 It was only yesterday my mate told me about this problem with the boards on the supra's, i dont know the answer to your question bud but i hope you find out. i take it if the engine management light failed it could also happen with the oil light?. Yeah mate it's a common fault where all the lights stop working on that side, normally it's just a case of resoldering the joints for the pins at the back of the plug and your good to go. But for some reason with mine it's just one light lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.