ashbuster Posted March 10, 2012 Share Posted March 10, 2012 (edited) hi guys fitting my blitz i-color and everything is going fine ive come to plumbing in the solenoid now and im confused on this the guide i have is for a dual solenoid so it doesnt show me whats what this is my solenoid on the dual solenoid in the guide i have printed there is an in and an out so its simples this one has 3 ports where a hose can go, i have pointed a red arrow to all 3 in the photo any ideas what goes where and what is what lol Edited March 10, 2012 by ashbuster (see edit history) Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 10, 2012 Author Share Posted March 10, 2012 ive managed to find it in a old guide it does say that these shouldnt be used in a twin turbo car but this setup come straight off a supra tt and worked fine this is for anyone interested or wanted to know the same because theres lots of old posts on here with others asking the same and had no answer in the thread from left to right the first red circle is BLEEDER the 2nd red circle is OUT the 3rd red circle is IN i take it the "bleeder" you just leave? Quote Link to comment Share on other sites More sharing options...
barneybrendan Posted March 10, 2012 Share Posted March 10, 2012 i have this if its any good as i have the same controller and soleniod to fit. http://ynsproduction.blogspot.com/2010/12/bo-ost-controller.html have you a link to the old guide you have used. Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 10, 2012 Author Share Posted March 10, 2012 (edited) yeah thats the exact same solenoid mate heres what i found to show me what was in and out http://www.naikontuning.com/det_tec/wp-content/uploads/2010/04/dual-sbc-spec-s.pdf i havent looked at the guide the wiring is pretty simple for my controller i just had to splice into the rpm and speed wire on the ecu and then give it a live and ground ive plumbed my vac line in from the boost gauge i now just need to plumb this in which is shown here http://www.mkiv.com/techarticles/blitz_dsbc/index.html same thing really both have an in and an out Edited March 10, 2012 by ashbuster (see edit history) Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 11, 2012 Author Share Posted March 11, 2012 in the guide on mkiv it says to cap 1 here and the other end of it but on here it doesnt say to do anything with it? what did you guys do, cap or leave connected? Quote Link to comment Share on other sites More sharing options...
ashbuster Posted March 11, 2012 Author Share Posted March 11, 2012 nevermind that bottom diagram is for the apexi i think, thats why its different http://www.mkiv.com/techarticles/avc-r/install/index.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.