Guest ugp Posted February 25, 2012 Share Posted February 25, 2012 What have you got? Must be going cheap. Set's of 6 will be considered if I can source another two from somewhere. Link to comment Share on other sites More sharing options...
David P Posted February 25, 2012 Share Posted February 25, 2012 You could have the existing ones cleaned and rebuilt to the cc required for less than it would cost to buy an unknown set that most probably would need cleaning. Link to comment Share on other sites More sharing options...
Guest ugp Posted February 25, 2012 Share Posted February 25, 2012 The ones I'm replacing are 315cc, I need at least 750's for this setup. Do you think the stock ones could be rebuilt to that spec? Link to comment Share on other sites More sharing options...
David P Posted February 25, 2012 Share Posted February 25, 2012 I can't answer that, but here's a couple of leads. http://www.ebay.co.uk/itm/Fuel-Injector-Ultrasonic-cleaning-Testing-/160723914096?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item256be44d70#ht_4782wt_1270 http://www.ebay.co.uk/itm/ULTRASONIC-FUEL-INJECTOR-CLEANING-SERVICE-CLEANER-/380072659398?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item587e1889c6#ht_5411wt_1037 Post up the answer, it would be useful info. Link to comment Share on other sites More sharing options...
RobSheffield Posted February 25, 2012 Share Posted February 25, 2012 What have you got? Must be going cheap. Set's of 6 will be considered if I can source another two from somewhere. Why 8? What engine is it for? Maybe if you explain what its for people can help. Do you want drop in or side feed for aftermarket rail (assuming 2JZ based) FWIW, im pretty sure you wont be able to 'rebuild to the correct cc', and certainly not for less than the cost of a used injector. Probably not even the cost of a new one. If you could people wouldnt go to all that hassle with fuel kits and would just rebuild stock 440s. Link to comment Share on other sites More sharing options...
Guest ugp Posted February 26, 2012 Share Posted February 26, 2012 Why 8? What engine is it for? Maybe if you explain what its for people can help. Do you want drop in or side feed for aftermarket rail (assuming 2JZ based) FWIW, im pretty sure you wont be able to 'rebuild to the correct cc', and certainly not for less than the cost of a used injector. Probably not even the cost of a new one. If you could people wouldnt go to all that hassle with fuel kits and would just rebuild stock 440s. It's for a 1UZ, hence the 8. I need stock fit injectors, due to top feed rails. Cheers Ben Link to comment Share on other sites More sharing options...
Recommended Posts