JamieP Posted February 22, 2012 Share Posted February 22, 2012 (edited) I keep reading about them but cant find them listed anywhere, I cant even find the VWR website? Anyone seen them listed anywhere? Edited February 23, 2012 by JamieP (see edit history) Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted February 22, 2012 Share Posted February 22, 2012 Is it what Darrett has? Quote Link to comment Share on other sites More sharing options...
Steve Posted February 22, 2012 Share Posted February 22, 2012 Can only see 4" on there (found via Facebook Page), not sure if its the official page though. http://www.wix.com/virtualworksracing/virtual-works Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 22, 2012 Author Share Posted February 22, 2012 Naff website, sent them a email, cheers. Quote Link to comment Share on other sites More sharing options...
EMPEROR Posted February 23, 2012 Share Posted February 23, 2012 Yeah, that's the best way, via e-mail. I wrote them for tons of stuff that are not listed but I've seen on some Supras and they are telling me prices and everything. Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 23, 2012 Author Share Posted February 23, 2012 No reply from VWR yet, What other 4"+ full turbo back exhaust options are there? i know BL, anything else? Is it what Darrett has? Yes, sounds evil. Quote Link to comment Share on other sites More sharing options...
supra matt Posted February 23, 2012 Share Posted February 23, 2012 Why not go see your guys at powerflow and get them to knock you up a full custom system mate Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 23, 2012 Author Share Posted February 23, 2012 Why not go see your guys at powerflow and get them to knock you up a full custom system mate They only do mig welding, its not very neat, I just want it perfect and the exhaust lets my car down i think. Quote Link to comment Share on other sites More sharing options...
welshbuddy Posted February 23, 2012 Share Posted February 23, 2012 They only do mig welding, its not very neat, I just want it perfect and the exhaust lets my car down i think. isn't your exhaust still the 4" ti whifbitz? Quote Link to comment Share on other sites More sharing options...
supra matt Posted February 23, 2012 Share Posted February 23, 2012 O right i though they all did tig im suripised at that as in there add they using tig, you not liking the ti now? Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 23, 2012 Author Share Posted February 23, 2012 The Ti is ok but the downpipe/midpipe is a terrible fit, sits to far to the passenger side and means the ti wont bolt up where it should, It has two 90 degree bends in it an all, I got it held up with cable ties, it just pisses me off every time i look at the car. Quote Link to comment Share on other sites More sharing options...
supra matt Posted February 23, 2012 Share Posted February 23, 2012 How about these guys they use tig and seem like they do a great jod http://mijexhaust.com/product-and-services/13.html Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 23, 2012 Author Share Posted February 23, 2012 To far, id die from carbon monoxide poisoning before i got there, Im going to pick up a couple of 45 degree 4" bends and sort it myself i think. Quote Link to comment Share on other sites More sharing options...
Scott Posted February 23, 2012 Share Posted February 23, 2012 90 degree bends on the exhaust JP? I thought they were going to be based on the HKS pipework? Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 23, 2012 Author Share Posted February 23, 2012 (edited) 90 degree bends on the exhaust JP? I thought they were going to be based on the HKS pipework? The Ti system is a copy of the HKS ti and is fine, its the midpipe that has two 90 degree bends in it, its a terrible fit and not a very good design for flow, also the flanges are to big, Paul has changed the design now and says the new one will fit 100%, i just cant face spending £450+vat he is asking for a new one when this one should have fitted. Edited February 23, 2012 by JamieP (see edit history) Quote Link to comment Share on other sites More sharing options...
Scott Posted February 23, 2012 Share Posted February 23, 2012 The Ti system is a copy of the HKS ti and is fine, its the midpipe that has two 90 degree bends in it, its a terrible fit and not a very good design for flow, also the flanges are to big, Paul has changed the design now and says the new one will fit 100%, i just cant face spending £450+vat on a new one when this one should have fitted. Ahh, so it's the midpipe being the pain Is it the midpipe you're looking to get chopped up then rather than the exhaust I take it? How are the boost logic pipes I have fitment wise? Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 23, 2012 Author Share Posted February 23, 2012 Yeah, BL stuff fits perfect. Quote Link to comment Share on other sites More sharing options...
Supra N_A Posted February 23, 2012 Share Posted February 23, 2012 these are awesome supposed to be one of the best out there, but seems a abit far lol.. might deliver if you could explain exactly what you want,never kno! http://www.aas-exhausts.co.uk/ Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 23, 2012 Author Share Posted February 23, 2012 these are awesome supposed to be one of the best out there, but seems a abit far lol.. might deliver if you could explain exactly what you want,never kno! http://www.aas-exhausts.co.uk/ They look pretty good to be fair, make stuff in titanium an all, to far though. Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 23, 2012 Author Share Posted February 23, 2012 Just found this place only 10 min from me, might be worth a look. http://www.simpsonraceexhausts.com/index.html Quote Link to comment Share on other sites More sharing options...
supra matt Posted February 23, 2012 Share Posted February 23, 2012 So let me get this straight your down pipe and mid pipe are form paul and dont fit his own system !!!!!! but now he has made a new one that will fit fine and wonts to charge you ? this is not the first time i remember a post a fue months back where someone had his set up and it did not fit , if thats the case that is shocking custoumer service! Quote Link to comment Share on other sites More sharing options...
Oddball87 Posted February 23, 2012 Share Posted February 23, 2012 Do ETS do down and mid pipes? Quote Link to comment Share on other sites More sharing options...
JamieP Posted February 23, 2012 Author Share Posted February 23, 2012 I'm not sure, Paul said today it was not designed to fit that exhaust, I'm just getting fed up with spending money trying to get this exhaust to work, the BL fitted fine and I wish I had stayed with it. Quote Link to comment Share on other sites More sharing options...
Oddball87 Posted February 23, 2012 Share Posted February 23, 2012 And dose anyone no of the quality of their 4" TI exhausts? Thinking of getting one for my single build Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted February 23, 2012 Share Posted February 23, 2012 Hey Jamie, these are traders on the car club i belong to, heard and seen some amazing things from them. they dont have a website but i copied this off our club site Full Flow Customs They are a very small but dedicated outfit the specializes in custom fabrication on the whole. Primarily in Exhaust manifolds and genuine performance exhausts suited down specific needs wether its for road of race, hill climbs or endurance. Full Flow Customs literally take it all on. They’re also non-specific to make and mark and have done RX7′s, Mx5′s and skylines to M5′s, Audi,Porsche and Ferrari. Other aspects of what Full Flow Customs do is ally header tanks, washer bottles and intercoolers. Please drop James a line whatever your needs. Email: [email protected] Phone: 07852 109 290 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.