ashbuster Posted February 21, 2012 Share Posted February 21, 2012 (edited) ive bought a blitz dual-sbc and its got a couple of bits missing which i knew hoses were missing anyway but it has been on another car so i need to make sure its right this is what i have now i think the wiring is here what i need but the connector is different this is the wiring on the back of the box (left one is what we need i think) red/black/blue/white/purple then this is the part on the loom red/black/blue/white this is the end of the loom blue/white now i take it the blue/white end goes to the dual solinoid and am i right in thinking red and black go to a positive and earth and then that connector on the end of it with all 4 wires in like in this photo connects to the part on the boost controller? but if this is right that means theres 1 wire thats not being used (PURPLE) plus the connecter dont fit so i would have to cut and connect them so i wanted to make sure Edited February 21, 2012 by ashbuster (see edit history) Link to comment Share on other sites More sharing options...
Josh Posted February 21, 2012 Share Posted February 21, 2012 Out of interest, you didn't buy this from either of the Num brothers did you? Link to comment Share on other sites More sharing options...
ashbuster Posted February 21, 2012 Author Share Posted February 21, 2012 im not sure where its form bud but it was from tooquicktostop he bought it for his car but hes had an ecu instead i think he said it was removed from a mr2 why bud? Link to comment Share on other sites More sharing options...
Josh Posted February 21, 2012 Share Posted February 21, 2012 im not sure where its form bud but it was from tooquicktostop he bought it for his car but hes had an ecu instead i think he said it was removed from a mr2 why bud? Recognised the postcode, that's all. Sorry for the off topic chat, just wondered Link to comment Share on other sites More sharing options...
ashbuster Posted February 21, 2012 Author Share Posted February 21, 2012 ohh lol Link to comment Share on other sites More sharing options...
ashbuster Posted February 21, 2012 Author Share Posted February 21, 2012 dont anyone have one of these they could check the wires in the back to see what colours go where from the loom Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now