dr_jekyll Posted February 9, 2012 Share Posted February 9, 2012 hi guys. in order to complete the revival of my supra i need the front part of a prop from a turbo mk3 with r154 and i really need some 1jz-r154 clutch cover bolts. or could anybody tell me if the tt6 has longer clutch cover bolts that will fit on the 1jz flywheel, thanks Link to comment Share on other sites More sharing options...
J_Supra_07 Posted February 9, 2012 Share Posted February 9, 2012 6speed bolts are long and only half threaded. Not 100% how long now but I'd say around 75mm long at a guess but. I know they where to long when I put my lightend fly in. Link to comment Share on other sites More sharing options...
dr_jekyll Posted February 9, 2012 Author Share Posted February 9, 2012 is that the flywheel bolts or the clutch pressure plate bolts dude? Link to comment Share on other sites More sharing options...
J_Supra_07 Posted February 10, 2012 Share Posted February 10, 2012 the flywheel bolts yeh. the other bolts are only small to hold the cover on. Link to comment Share on other sites More sharing options...
Mr Ree Posted February 10, 2012 Share Posted February 10, 2012 The ARP flywheel bolts will be the best option. They use the same ones as the 4AGE engine, and are quite well priced Link to comment Share on other sites More sharing options...
dr_jekyll Posted February 10, 2012 Author Share Posted February 10, 2012 ok guys , sligtly missing here. my flywheel bolts are fine. i need the bolts to fix the pressure plate to the flywheel. the w58 clutch bolts are too short to go throught the r154 clutch housing , so im guessing the pull type clutch bolts on the soarer or mk3 will be longer. these are the ones i need Link to comment Share on other sites More sharing options...
Chris Wilson Posted February 10, 2012 Share Posted February 10, 2012 Just get some grade 8 hex heads or some cap heads, there's nothing special at all about clutch cover bolts, in fact cap heads will be far better quality. the only "trick" bolts in the region are the flywheel to crank bolts. Link to comment Share on other sites More sharing options...
dr_jekyll Posted February 10, 2012 Author Share Posted February 10, 2012 (edited) thanks chris, any idea on what thread pitch they are and the correct lenthof the stock ones Edited February 10, 2012 by dr_jekyll (see edit history) Link to comment Share on other sites More sharing options...
garethr Posted February 11, 2012 Share Posted February 11, 2012 The 1JZ clutch cover bolts (90119‑08302) are the same as the bottom cambelt pulley bolt on a 7M, so you should have no problem ordering them from your local Toyota dealer. Link to comment Share on other sites More sharing options...
dr_jekyll Posted February 11, 2012 Author Share Posted February 11, 2012 thank you sir Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now