renegade Posted February 2, 2012 Share Posted February 2, 2012 i have a squeak comming from the drive belt tensioner pulley have put wd40 on and it stops but doesn't last long . so i think the bearing might be shot so how easy is it to replace the bearing ie what all has to come off. Link to comment Share on other sites More sharing options...
Geo Posted February 2, 2012 Share Posted February 2, 2012 Page 15 bud http://www.turbosupras.com/pdfs/JZA80%20TSRM/EM%20%282JZ-GTE%29.pdf Link to comment Share on other sites More sharing options...
Lude Posted February 2, 2012 Share Posted February 2, 2012 is yours defo from the tensioner? only reason i say, is because i have a squeek around that area, and wonder how i can find out where the noise is coming from. (i have a new belt) Link to comment Share on other sites More sharing options...
renegade Posted February 3, 2012 Author Share Posted February 3, 2012 well i put wd on it and it stopped as the belt isn't that old as it was placed last year when the crankshaft pulley fell off. Link to comment Share on other sites More sharing options...
Swampy442 Posted February 3, 2012 Share Posted February 3, 2012 It will be the tensioner pulley, its a common thing. Link to comment Share on other sites More sharing options...
Chris Wilson Posted February 3, 2012 Share Posted February 3, 2012 If it's a plastic pulley the bearing is moulded in and not replaceable. Toyota don't sell the pulley on its own, only the whole tensioner arm assembly. Either hope it's a steel pulley where the bearing is replaceable (I keep them in stock), or see Whifbitz, I think they do an alloy pulley to replace the plastic one. Link to comment Share on other sites More sharing options...
renegade Posted February 3, 2012 Author Share Posted February 3, 2012 it is a steel pulley going by the rust marks on it Link to comment Share on other sites More sharing options...
renegade Posted February 6, 2012 Author Share Posted February 6, 2012 i'm just double checking this ,have removed pulley and taken the bearing out . the bearing is 6203. going to be puting in a skf 6203-2rs will this do? Link to comment Share on other sites More sharing options...
Gambit Posted April 3, 2013 Share Posted April 3, 2013 Hello, I'm looking to do this bearing swop, did it work? Thanks, Mark. Link to comment Share on other sites More sharing options...
trebor69 Posted April 3, 2013 Share Posted April 3, 2013 Mine squeals like a pig ...... I thought it was a whole replacement pulley ? Link to comment Share on other sites More sharing options...
jonc Posted April 3, 2013 Share Posted April 3, 2013 For the metal pulleys the bearing number is 6203-2RSH. I bought an SKF bearing from an engineering supplier for £7.50. If you have a bit of an engineering brain its a simple job. If plastic then like Chris has already stated then a replacement unit will be needed. Link to comment Share on other sites More sharing options...
trebor69 Posted April 6, 2013 Share Posted April 6, 2013 For the metal pulleys the bearing number is 6203-2RSH. I bought an SKF bearing from an engineering supplier for £7.50. If you have a bit of an engineering brain its a simple job. If plastic then like Chris has already stated then a replacement unit will be needed. I picked up one of these bearings for £4.95 delivered and have just fitted it .......oh how quiet it is now :-D .....thanks for the part number ;-) Link to comment Share on other sites More sharing options...
jonc Posted April 6, 2013 Share Posted April 6, 2013 I picked up one of these bearings for £4.95 delivered and have just fitted it .......oh how quiet it is now :-D .....thanks for the part number ;-) Hmm I was seen off by 2.50:blink: Glad the info helped;) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now