Pudsey Posted March 20, 2014 Share Posted March 20, 2014 Really like the black wheels against the silver. Look forward to seeing the future updates, and finished set up. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted March 23, 2014 Author Share Posted March 23, 2014 Small update: 1: new interior carpet ordered, original has some marks and wear patches. So decided to order a new one, with the back seat mold + another 2 yards to finish the trunk off. All from the same sheet of fabric. So should look absolutely tidy when installed. 2. With the above in mind, i have now decided, even though the cage will go in. I am going to putt all interior in too. Went and got some interior plastics today. Those will be cleaned and sprayed black, after that the rear seat needs a small repair, but i was thinking of having it done in black leather equal to the oem type. 3: new isolation/ damping materials ordered to place before the carpet arrives. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted March 26, 2014 Author Share Posted March 26, 2014 (edited) Treated some interior parts of the chassis to some extra insulation today, DEI boom mat spray on insulation. Treated the parts which will not have padding applied to them. The car was already nice and quiet inside. So this will make the car a lot more enjoyable On longer trips. Next step is applying the sound/heat insulation and test fit the cage. Edited March 30, 2014 by Callaway Motorsport (see edit history) Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted March 30, 2014 Author Share Posted March 30, 2014 (edited) Finished applying the extra insulation yesterday. Just waiting for the new carpet now. Also started to refresh all the interior plastics in a nice Coat of black paint for these parts. We've used special VHT paint which has been made for these items. Will not flake or fade. Works very well. [ATTACH=CONFIG]182881[/ATTACH] Edited March 30, 2014 by Callaway Motorsport (see edit history) Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted July 14, 2014 Author Share Posted July 14, 2014 Some updates, not had time recently to do so. but still busy with the car, slowly getting there now with the interior. NEw carpet all done and actually made both the drivers side and passenger side carpet extend right up the top in the footwell. https://scontent-b-ams.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10314476_615745225177547_3308628987106752916_n.jpg?oh=d91fce87099221a31bd185f284800712&oe=54339B07 The son also approved of the car already https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10313136_628491543902915_1499732190471095960_n.jpg?oh=9d038e28049ab4c866de0552708335bb&oe=54353290&__gda__=1414259194_de909ef21269baee75924215b57541cb The cage mounted and floor holes drilled and bolts places for test fitting and slowly working my way forward (only the fronts to do now) New Toyos mounted up front 265 Wheels away for new tyres With the brides (no not a woman...) From the back Carpet Quote Link to comment Share on other sites More sharing options...
Guest homers8 Posted July 16, 2014 Share Posted July 16, 2014 where did u get the bonnet? Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted July 16, 2014 Author Share Posted July 16, 2014 Its a "border" bonnet from Japan. It was on the car when I purchased it there. You can still get them and I believe someone here is selling a carbon version. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted July 18, 2014 Author Share Posted July 18, 2014 Started hiding the cage points under the carpet. Fronts done, just the rest now. Quote Link to comment Share on other sites More sharing options...
Luxluc Posted July 18, 2014 Share Posted July 18, 2014 Nice work Dane. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted August 25, 2014 Author Share Posted August 25, 2014 Last foot mounting point done last saturday, starting on the boot now, Rear seats will go to the upholstery company soon (I reckon after JAE or just before) she will put the same type of leather on, but then in black with red stitching. Alternatively i may go for the same fabric as the Bride seats, but i reckon keeping to the leather will make it a little more universal but also easier to clean. Please excuse the bonnet and wiring, that will all be gone soon, Complete Custom wiring harness will be made and also new OEM bonnet with louvres to be painted and installed (i may even have it wrapped) Quote Link to comment Share on other sites More sharing options...
tony tt Posted August 25, 2014 Share Posted August 25, 2014 Looking rather tasty dude. Quote Link to comment Share on other sites More sharing options...
listy Posted August 25, 2014 Share Posted August 25, 2014 You sure that's a Border bonnet? The Border one I had didn't have the gap in the centre of the vent. It might be an earlier/later version though. It looks like the one DodgyRog used to have. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted August 25, 2014 Author Share Posted August 25, 2014 Tbh I don't care lol, it's just fiberglass and a piece of crap. So it's coming off straight into the bin. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted August 25, 2014 Author Share Posted August 25, 2014 Thanks Tony Looking rather tasty dude. Quote Link to comment Share on other sites More sharing options...
Luxluc Posted August 25, 2014 Share Posted August 25, 2014 Looks great so far Dane. That rear pic .... mmmm .... bad a$$ :d Quote Link to comment Share on other sites More sharing options...
Kaan W Posted August 25, 2014 Share Posted August 25, 2014 Coming along nicely, good work Dane! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.