Callaway Motorsport Posted January 31, 2012 Share Posted January 31, 2012 Hi guys, so its a while since we were updating our old project thread, and since we are now on a roll again on getting this car on the road/ track, i though it would be best to make a new topic with a more "summarised" start. Here's how the spec started out from the sale: 2JZGTE HKS T04R Turbo (Garrett T67 (T04R)) Good for around 600+whp T4 style inlet flange with 2.5" V-band exit, A/R: 1.00 HKS SS Manifold HKS 60mm Wastegate with screamerpipe. HKS Induction Filter (now replaced with an AEM 4 inch filter) HKS M40I Super Fire Racing Plugs Aftermarket Hi Lift Cams (still need to check this, in my eyes they seem pretty much stock) Metal Suction Pipe (crappy thing now in the trashhhh) Oil Cooler and Oil Filter Relocation Kit (needs re-fitting and placing it in different space) Aftermarket Front Pipe Titanium Exhaust System (to be replaced with our own fully custom 4 inch system) Large Blitz Front Mounted Intercooler Kit Trust Racing Blow Off Valve (Now replaced by a Tial Q) Aftermarket Injectors (Red) (just 550cc sard) ARC Rad Cap (replaced by Titek model) Clear Front Winkers (now being re-wired properly) Tanabe Sustec Front Strut Brace (replaced by a TRD model) Polished Cam Covers (replaced by a new set from the UK, whilst still in the UK Lee @ SRD welded two new bungs on to fit the PHR breather system) SUSPENSION / BRAKES / WHEELS / DRIVE Getrag 6 Speed HKS Multi Plate Clutch 2 Piece Front & Rear Slotted Rotors from project Mu Aftermarket Brake Pads Project Mu CST Zero-1 Coilovers Rear braided Brake Lines and also on front 18" Work Emotion CR Kai Alloys ( now sold to James, being replaced by a track set of Enkei RPF 1's) Large UK spec calipers front and back. BODY / EXTERIOR Late Model Headlights (HID) (now EU glass) FRP Vented Bonnet Top Secret Front Aero (now stock) Top Secret Side Skirts (now stock) Top Secret Rear Canards (now gone) Front FRP Wide Fenders (Ridox) Rear Fenders Folded for Clearance (re-done when it was repainted, properly done now and going to be rolled a little more soon to fir the new wheels) Rooftip Spoiler (now gone) INTERIOR Momo Concept Steering Wheel Blitz ID Power Meter (Being replaced by an HKS EVC 6) Blitz Sequential ID Boost Controller (Being replaced by an HKS EVC 6) Bride Drivers Bucket Seat (now gone, have two new Bride Stradia 2 low max seats in there with the low rails) We first purchased the car in japan like so: https://lh4.googleusercontent.com/-x7JinG7IKsU/Sz5wLQM1WKI/AAAAAAAADi4/Pdhk4bDM358/s800/T04R+Supra+%28223%29.jpg https://lh4.googleusercontent.com/-otPQACDs9ZI/Tt1c8tyDnMI/AAAAAAAADkc/h5tcse4wt8M/s800/T04R+Supra+%28188%29.jpg Taking it back from the UK, where it was imported, put on UK plates by a friend and then driven over here. https://lh4.googleusercontent.com/-5kY7bbOd108/Sz5wL2AxftI/AAAAAAAADi4/G5fpLx1D7wE/s720/DSC07150.JPG Underside was a little mess, so I decided to clean it up a little: Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted January 31, 2012 Author Share Posted January 31, 2012 (edited) Getting prepped for new paintjob (standard Silver but with more metallic particles) gives it a little more kick/ shine. https://lh3.googleusercontent.com/-Y1TBDohqGOY/Sz6CRf3BkCI/AAAAAAAADi4/oArvAoA0f2k/s720/DSC09250.jpg https://lh3.googleusercontent.com/-IlWyeFkk-as/Sz5wlUaA65I/AAAAAAAADi4/1D8JQaCFfrs/s720/DSC09335.JPG New paint: https://lh6.googleusercontent.com/-M2xib7zzeJ0/Sz5wlmcOisI/AAAAAAAADi4/wFf3KEHBxws/s720/DSC09736.jpg Bonnet re-done, my bodyshop man did an awesome job, and made it metallic black with flakes of gold (in real it doesnt really show untill the sun shines straight on, so its not any boyracer overkill) You have to see it in real to appreciate it https://lh3.googleusercontent.com/-LRV9F5lIQGk/Tyc1vOrLjFI/AAAAAAAADyA/yXtRktPdPU8/s720/DSC09762.JPG Also re-did my dash panels as they were scratched everywhere... took me a while, but i think they look good. https://lh5.googleusercontent.com/-Ebl4EGVq-qo/Tyc2gyeUBVI/AAAAAAAADyM/zx2IIjHIvV4/s720/DSC08089.JPG https://lh6.googleusercontent.com/-6dAQZpBabws/Tyc2hRgMRfI/AAAAAAAADyU/TRO0yeta1w8/s720/DSC08096.JPG https://lh3.googleusercontent.com/-PNtT1PoJAj0/Tyc2hhVWcPI/AAAAAAAADyY/_je0k46kUoU/s720/DSC08079.JPG https://lh6.googleusercontent.com/-8LfawGnN_3k/Tyc2kIXnuRI/AAAAAAAADyg/nB-OqDJwZuQ/s720/DSC08083.JPG https://lh3.googleusercontent.com/-DFsRYkJ_TAw/Tyc2nhuFW7I/AAAAAAAADy0/85e8blgsGfA/s720/DSC08085.JPG Then the propshaft protecter + intake pipe coated: Test fitted one of the bride seats and rails. Edited January 31, 2012 by Callaway Motorsport (see edit history) Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted January 31, 2012 Author Share Posted January 31, 2012 (edited) Turbo was a little problem. Car was first mapped with Fcon in the UK and made 413 to the wheels and 490 on crank with about 540 ft lbs on stock engine, stock fuel system etc, just turbokit (which was already on the car) altough i wasnt very happy with the look of the turbo, i had it checked, the guys told me the bearing was dead, and someone had run the turbo without any oil at all, resulting in a burned journal bearing... https://lh6.googleusercontent.com/-8ViVn84PcOE/Tyc3HAcR-QI/AAAAAAAADz8/LGFy8J9dpeA/s800/T04R+Supra+%28235%29.jpg Because the bearing was a size no longer available..and the turbo being quite awesome i decided to have the centre cartridge replaced by an original Garrett unit. Same size everything, just the bearing was a different size. All fully re-balanced etc. All refreshed now and looking forward to seeing what it does with a new remap and fuel system + most probably a worked on head... https://lh5.googleusercontent.com/-oJBDw6NChvg/Tyc2020V9NI/AAAAAAAADzk/MVibiJqY3Z0/s800/DSC_0274.JPG https://lh4.googleusercontent.com/-0HQaEsnc7OY/Tyc2zB8gb6I/AAAAAAAADzc/nCXqYGj2IIk/s800/DSC_0270.JPG https://lh4.googleusercontent.com/-49gFWJgpf_g/Tyc2vaVxezI/AAAAAAAADzM/qh4TxZTzX2Y/s800/DSC_0269.JPG https://lh5.googleusercontent.com/-rk_YYaGjCIw/Tyc2vXXHrUI/AAAAAAAADzI/W5ALCVLaixA/s800/DSC_0267.JPG https://lh5.googleusercontent.com/-YpKDvELG68g/TeWNjMTJC3I/AAAAAAAADi4/8y-SjopdQ9I/s800/DSC_0275.jpg Time to buy some parts: https://lh3.googleusercontent.com/-g63hfyYKLHs/Sz59QCqPmlI/AAAAAAAADi4/U6hEOCPGkdY/s720/DSC07062.JPG https://lh4.googleusercontent.com/-Teg8rBxY6BQ/Sz59Pbb9jMI/AAAAAAAADi4/c9QCRS2G-SA/s720/DSC07051.JPG https://lh5.googleusercontent.com/-lmkFEU3PL0s/Sz59O4GXGFI/AAAAAAAADi4/KuvxxoYzYws/s720/Kopie+van+DSC07041.JPG https://lh5.googleusercontent.com/-0EIi7pjcz8I/Sz59M9POfVI/AAAAAAAADi4/37WhXveJco4/s512/DSC05710.JPG More later, seeing as we make our own exhaust systems custom for any car, here are the parts we will be using for our supra all 4 inch stainless: Edited January 31, 2012 by Callaway Motorsport (see edit history) Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted January 31, 2012 Author Share Posted January 31, 2012 (edited) Now, we sold the CR Kai's to a forum member on here, after having them coated and refurbed to perfection. We came across a project from one of our Australian forum friends who had a nice choice of track wheels, seeing i had the same front fenders as him, i decided to go with these also, and another reason: because we are also going for some track time this year... Here's a picture from the Gorrilla industries Supra, with Enkei RPF1's in matte black, ours will be coated a slightly different black/ dark color when they arrive. https://lh5.googleusercontent.com/-dg2AG_lJZYY/TxeMQ1elUJI/AAAAAAAADvY/1HkiZmIlOlk/s800/5602711080_ccdc61af67_b.jpg https://lh3.googleusercontent.com/-xRIc5Q85_JI/TxeMRJRSilI/AAAAAAAADvc/KuBQ_oM2Ifo/s800/5602710920_2036789f72_b.jpg I will be fitting slightly smaller tyres than him though, Kumho V70a semi's in 305 rear and 265 fronts. Also, we have a Koyo radiator on the way (large size) + Tial Q and Mishimoto fan shroud kit. Paul is also providing me a whifbitz upper rad pipe. Plans are that i will probably go for the SRD billett lower waterneck too. Edited January 31, 2012 by Callaway Motorsport (see edit history) Quote Link to comment Share on other sites More sharing options...
Guest JohnSupra1 Posted January 31, 2012 Share Posted January 31, 2012 Wow i like that! Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted January 31, 2012 Author Share Posted January 31, 2012 Topic all redone now Quote Link to comment Share on other sites More sharing options...
Jos Posted January 31, 2012 Share Posted January 31, 2012 Nice going Dane, when do you think you'll have it running?, would really like to see (and hear:eyebrows:) your supra again. Keep the updates comming! Quote Link to comment Share on other sites More sharing options...
TRD-Rob Posted January 31, 2012 Share Posted January 31, 2012 love those seats mate can i ask where you got them ? Quote Link to comment Share on other sites More sharing options...
Geo Posted January 31, 2012 Share Posted January 31, 2012 Awesome bud. great thread you got going. Quote Link to comment Share on other sites More sharing options...
marcAB10 Posted February 1, 2012 Share Posted February 1, 2012 awesome build , what type of gear knob is that? Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted February 1, 2012 Author Share Posted February 1, 2012 Nice going Dane, when do you think you'll have it running?, would really like to see (and hear:eyebrows:) your supra again. Hope to have most of what i want done, finished in april... love those seats mate can i ask where you got them ? We supply them ourselves dude Awesome bud. great thread you got going. Thanks alot George awesome build , what type of gear knob is that? It's the Greddy one mate Quote Link to comment Share on other sites More sharing options...
Westy Posted February 1, 2012 Share Posted February 1, 2012 Great build! Car looks awesome! awesome build , what type of gear knob is that? Greddy as stated...best looking knob for the Supra and same one as I have fitted mate! Quote Link to comment Share on other sites More sharing options...
fastcar Posted February 1, 2012 Share Posted February 1, 2012 Nice rebuild thread. The new paint job reall makes a big diffrents to the look of the car. Great job Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted February 1, 2012 Author Share Posted February 1, 2012 Yeah it does, the paint was actually quite matte when it arrived. right side of the car was ok but other side and most of the vehicle was matte, i recon they tried to spray it themselves or something. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted February 22, 2012 Author Share Posted February 22, 2012 Small update, New radiator and shroud are in. https://lh6.googleusercontent.com/-juY0llh1lJs/T0Vu6Mw9U6I/AAAAAAAAD1I/WyHR8HbBdVM/s783/DSC_1444.jpg Tial Q in Red https://lh3.googleusercontent.com/-TLEHGPQ5rUw/T0Vv8bTBOFI/AAAAAAAAD1k/0JXu6BCxqqY/s783/DSC_1473.JPG Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted February 22, 2012 Author Share Posted February 22, 2012 (edited) HKS T4 Manifold and cam covers are also back from Ceramic coating. More detailed pics soon. Edited February 29, 2012 by Callaway Motorsport (see edit history) Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted February 29, 2012 Author Share Posted February 29, 2012 Some more detailed pics i made today https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/425577_355930701108606_282158151819195_1136478_1009412622_n.jpg https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/420207_355930784441931_282158151819195_1136480_1950978565_n.jpg https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/417531_355930821108594_282158151819195_1136481_1582385140_n.jpg https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/421312_355930837775259_282158151819195_1136482_625510573_n.jpg Quote Link to comment Share on other sites More sharing options...
Pixelfill Posted March 1, 2012 Share Posted March 1, 2012 ooooooo I like those, loving the manifold in white Quote Link to comment Share on other sites More sharing options...
Geo Posted March 1, 2012 Share Posted March 1, 2012 Awesome Dane. They look well tasty. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted March 1, 2012 Author Share Posted March 1, 2012 Thanks George, they should look nice with the PHR catchtank system. I have black fittings with them. Thinking to have all other fittings and hoses black/gold quick release connnectors which have internal valves. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted March 28, 2012 Author Share Posted March 28, 2012 some small bits on their way still. EVC6 came in a while ago. with easy writer... https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/431222_364859123549097_282158151819195_1162429_923549667_n.jpg https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/425338_364859160215760_282158151819195_1162430_64706053_n.jpg Quote Link to comment Share on other sites More sharing options...
lexmk4 Posted March 29, 2012 Share Posted March 29, 2012 awesome updates Car is looking great with that new paint Quote Link to comment Share on other sites More sharing options...
Geo Posted March 29, 2012 Share Posted March 29, 2012 Nice one mate, coming along very nicely indeed. Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted March 29, 2012 Author Share Posted March 29, 2012 (edited) ... Edited April 5, 2012 by Callaway Motorsport (see edit history) Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted April 5, 2012 Author Share Posted April 5, 2012 (edited) Enkei wheels have been cancelled, US importer was keeping me on a leash and kept lying to us for about 3 months. So beware people, DO NOT ORDER ENKEI FROM THE STATES OR US IMPORTER PEAK PERFORMANCE... bunch of amateurs. We managed to cancel them, which means they had not ordered them at all (probably waiting till they have a larger amount of orders). Edited September 27, 2012 by Callaway Motorsport (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.