RedM Posted July 27, 2005 Share Posted July 27, 2005 Have had complaints at work that cars driving through our car park are setting off the prox alarm. I've had to choose from parking the car far away and out of sight (gypsy camp up the road so no way) or disabling the prox part of the system. I've settled on that. Question though. How hard a job is it to reduce the size of the proximity bubble around the car? I'm asssuming I'd need some software etc. Quote Link to comment Share on other sites More sharing options...
Maxx Posted July 27, 2005 Share Posted July 27, 2005 I'm assuming you have a Clifford alarm, if its the same as mine it has a dual zone proximity alarm which bleeps when someone is near your car (zone2) and sounds the allarm if some is in the car (zone1). You can turn off these zones with your remote either just zone2 or both zones. Its fully explain on page 15 of the manual: Clifford Concept 600 Manual Hope this helps. Quote Link to comment Share on other sites More sharing options...
RedM Posted July 27, 2005 Author Share Posted July 27, 2005 I already knew that but thanks for replying. Quote Link to comment Share on other sites More sharing options...
Maxx Posted July 27, 2005 Share Posted July 27, 2005 Sorry, okay try page 11 of this document it details how to adjust trhe sensitivity etc: Clifford Concept 600 Installation Quote Link to comment Share on other sites More sharing options...
RedM Posted July 27, 2005 Author Share Posted July 27, 2005 Oh dear, I am such a numpty. I have the manual at home and read the bit above the relevant section and the bit below it but never the bit about how to reduce it. Cheers again. Quote Link to comment Share on other sites More sharing options...
Maxx Posted July 27, 2005 Share Posted July 27, 2005 Plonker Quote Link to comment Share on other sites More sharing options...
RedM Posted July 27, 2005 Author Share Posted July 27, 2005 I do this sort of thing all the time. Must be a genetic flaw. Quote Link to comment Share on other sites More sharing options...
RedM Posted July 27, 2005 Author Share Posted July 27, 2005 Hmmm, checked my manual once I got home and that section ISN'T in it. All it says is the sensor settings need to be altered by a trained specialist! I knew I is not stupid. Quote Link to comment Share on other sites More sharing options...
uk-rich Posted August 3, 2005 Share Posted August 3, 2005 they can be done from the key fob, i watched the alarm fitter adjusting mine Quote Link to comment Share on other sites More sharing options...
iainc Posted August 4, 2005 Share Posted August 4, 2005 can be done via computer, need cliffnet software and a cable. also allows you to choose 1 of 15 different siren sound (apparently). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.