hodge Posted December 31, 2011 Share Posted December 31, 2011 I'm after a sheet of thermoplastic. The plastic stuff you heat up and mould it into shapes. The plan is when I do my rear seat sub box I want to use it to make a mould of the bottom of the car to put the fibreglass onto instead of masking tapeing the floor up and applying the fibreglass to that. Anyone know who or where supplies this or point me in the direction of any alternative products. Thanks John Quote Link to comment Share on other sites More sharing options...
jagman Posted December 31, 2011 Share Posted December 31, 2011 ttp://www.flints.co.uk/acatalog/Wonderflex_3.html Wonderflex3 is what you need flints can supply,the thin stuff is very flexible and sticks to anything ,can be easy layered , the thicker 4 mm stuff is Les bendy but you could make your box from it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.