carlmhtt Posted December 31, 2011 Share Posted December 31, 2011 Is it moly grease that should be applied to cams etc upon rebuild or is there something more specific? This is like a start up grease to protect everything I those first critical minutes. Cheers carl Quote Link to comment Share on other sites More sharing options...
Dnk Posted December 31, 2011 Share Posted December 31, 2011 (edited) Use a cam lube, something like this Its on ebay, 8 oz bottle is £6.50 ish Edited December 31, 2011 by Dnk (see edit history) Quote Link to comment Share on other sites More sharing options...
carlmhtt Posted December 31, 2011 Author Share Posted December 31, 2011 Use a cam lube, something like this Its on ebay, 8 oz bottle is £6.50 ish Thanks Dunk, that's the stuff, none of the local car part places seem to do it. I'll searching eBay, cheers. Carl Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 31, 2011 Share Posted December 31, 2011 I use a spray on moly grease, at a pinch moly bike chain lube is OK. The stuff I use is by Rocol.With a spray on grease it stays put until the engine's fired up, assembly lube eventually drains off if the engine is stored for a while. Quote Link to comment Share on other sites More sharing options...
basaez Posted December 31, 2011 Share Posted December 31, 2011 http://www.nimbusmotorsport.com/ProdShop2.asp?id=706&CATID=298 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.