StuartW Posted December 31, 2011 Share Posted December 31, 2011 Hi I have from my car for grabs the following.. Getrag V160 6 speed gearbox, Dual mass flywheel, Slave cylinder, Clutch Flexi stainless braid line and OEM hardline from slave to bulkhead hardline. Short shifter with reverse lock out. A frame shift support AP shifter bush kit complete 6 speed prop shaft I think i should be able to supply all the nuts and bolts but what is required for a conversion depends upon what the receiving Supra is i.e. Auto, 5 speed Man etc. For me i converted from a SZ 5 speed N/A and the master cyl, trans to engine bolts and bulkhead lines where the same. They reccomend new flywheel bolts every time, i may be able to find a couple or 4 new ones from various past projects. RPS streetmax 38% uprated clutch done less than 1500 miles, plenty of life left. Capable of holding 700+hp on a BIG single.. and IMO was the best all round high performance clutch £500 Duel mass fly £300 6 Speed BIG Torsen LSD diff, always had the proper oil and regular changes (always comes out clean) inc both driveshafts. driveshafts £150 pair. £800 inc uk delivery or knock off £80 for collection Link to comment Share on other sites More sharing options...
StuartW Posted December 31, 2011 Author Share Posted December 31, 2011 Just to add sorry no PX as i have sourced all the other parts i require now. Also i wont split the gearbox out seperately as this is the main expense and if anyone has had to buy new or source any of the associated parts new or used for these rare set ups then you will know. Link to comment Share on other sites More sharing options...
Velociraptor Posted January 3, 2012 Share Posted January 3, 2012 Hi mate, i have a 95 TT auto and am interested in converting mine to a manual. Is all the above listed all i need to do the conversion? How many miles has the gearbox done? Do i need the 6 Speed BIG Torsen LSD diff as well for the conversion or is my one fine? Sorry if this is a silly question, i am fairly new to the Supra world Link to comment Share on other sites More sharing options...
StuartW Posted January 3, 2012 Author Share Posted January 3, 2012 Yours will have a non lsd i suspect, Check out the trans/axle code on the inner drivers wing to be sure. I cannot say what the mileage is because i bought a complete car to obtain this as they where so hard to find! Mileage on that since it was fitted was 800 miles! then i have owned it for circa 4 years and done no more than 2500 miles. I think you may need a master cylinder (N/A Manual ones will work ok) a clutch pedal of course, probably a smaller brake pedal and maybe a plate made for where the shifter sits. As i mentioned in my first post i have never done a Manual to auto conversion. Stu Link to comment Share on other sites More sharing options...
Velociraptor Posted January 3, 2012 Share Posted January 3, 2012 Thanks for the heads up chap, it's a conversion i hope to do sometime (obviously it's an expensive thing to do), not in a rush to do it but hope to do when a bargain appears on parts. When someone breaks a TT or T manual with all the necessary parts i guess Link to comment Share on other sites More sharing options...
viper Posted January 3, 2012 Share Posted January 3, 2012 intrested in the clutch, can you pm me your best price posted please Link to comment Share on other sites More sharing options...
StuartW Posted January 11, 2012 Author Share Posted January 11, 2012 Bump if anyone is interested in seperate parts just fire me an offer via PM. Thanks Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted January 11, 2012 Share Posted January 11, 2012 Must resist.... Link to comment Share on other sites More sharing options...
StuartW Posted January 14, 2012 Author Share Posted January 14, 2012 Must resist.... Give me your wife's number..i will have a chat with her anyway all still available.. Link to comment Share on other sites More sharing options...
StuartW Posted February 16, 2012 Author Share Posted February 16, 2012 bump Link to comment Share on other sites More sharing options...
Jos Posted February 16, 2012 Share Posted February 16, 2012 You have Pm;) Link to comment Share on other sites More sharing options...
j.oe Posted February 18, 2012 Share Posted February 18, 2012 Hi Stuart Looks like the bare gearbox is sold. I'm still interested in all parts around. Can't send you a pm, your inbox seems to be full. Please pm me. Link to comment Share on other sites More sharing options...
Jos Posted February 18, 2012 Share Posted February 18, 2012 As above, your inbox is full so can't reply to your pm Link to comment Share on other sites More sharing options...
StuartW Posted February 18, 2012 Author Share Posted February 18, 2012 Hi Stuart Looks like the bare gearbox is sold. I'm still interested in all parts around. Can't send you a pm, your inbox seems to be full. Please pm me. Me bad sorry! all cleared now...:-) yes the actual gearbox has been sold and sent to finland, I still have available the clutch, fly, slave, hardpipe clutch line, shifter a frame, propshaft, rear driveshafts. Many thanks. Link to comment Share on other sites More sharing options...
j.oe Posted February 18, 2012 Share Posted February 18, 2012 Hi Stuart I'll take the shifter-a-frame and the slave. PM me your price. Link to comment Share on other sites More sharing options...
Jos Posted February 24, 2012 Share Posted February 24, 2012 You have another pm, I'd like to know if you received my payment yet? (and free bump) Link to comment Share on other sites More sharing options...
davep Posted February 24, 2012 Share Posted February 24, 2012 Is the fly wheel still available Link to comment Share on other sites More sharing options...
j.oe Posted February 25, 2012 Share Posted February 25, 2012 Hi Stuart Did you leave for the carribean islands ? I PM'ed you for shifter parts and my diff last week. Link to comment Share on other sites More sharing options...
Jos Posted February 25, 2012 Share Posted February 25, 2012 I think he's very busy?, haven't heard from him since sunday Link to comment Share on other sites More sharing options...
StuartW Posted February 26, 2012 Author Share Posted February 26, 2012 been flat out finishing this http://www.mkivsupra.net/vbb/showthread.php?258135-CarmaSupra-7-Sec-Street-Drag-Project-2012 Link to comment Share on other sites More sharing options...
Recommended Posts