b_have Posted December 21, 2011 Share Posted December 21, 2011 Hi all, I'm fitting a 2KW inverter into my mobile workshop (karting) and need to run a cable from the 110ah leisure battery to the inverter. Can I use cooker type cable to connect or what would you recommend? (will only be running power tools and 1kw kettle from the inverter). Link to comment Share on other sites More sharing options...
hackin_n_bashin Posted December 21, 2011 Share Posted December 21, 2011 If it's all inside, you'll get away with some 6mm twin n skin (cooker type cable) most diy places will have it. If your routing it outside, you'll either need to put it in a conduit or use a SWA cable, 6mm again, 3 core (2 cores and an earth) you might get away with 2.5 or 4mm but you shouldn't use power tools and boil the kettle at the same time. H'n'S Adam Link to comment Share on other sites More sharing options...
b_have Posted December 21, 2011 Author Share Posted December 21, 2011 Thanks matey, exactly what I needed to know Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now