AntD Posted July 24, 2005 Share Posted July 24, 2005 What is the biggest twin setup currently available?Also,will the sequential setup be lost when uprating to bigger twins? I am very new to all this ,but do like the idea of upgrading to bigger twins some time in the future Link to comment Share on other sites More sharing options...
GeordieSteve Posted July 24, 2005 Share Posted July 24, 2005 Maybe speak to Leon. According to fast car mag (sod off ok it was a mate's magazine and I had a nosey in it!) his big twins are making 1050bhp Link to comment Share on other sites More sharing options...
AntD Posted July 24, 2005 Author Share Posted July 24, 2005 Geez thats a lot of bhp.I havent seen the latest specs of his car.Thanx for the quick reply.I'll have a browse on his website just now to see if there's any relevant info there Link to comment Share on other sites More sharing options...
Class One Posted July 24, 2005 Share Posted July 24, 2005 Also check out J Tuner mag issue 3, there's a big article about Leons' car Link to comment Share on other sites More sharing options...
GeordieSteve Posted July 24, 2005 Share Posted July 24, 2005 Hold on, is it REALLY running 1050bhp on big twins? I didn't think it was possible (thought it was Fast Car's bollocks talk like saying he had a 3JZ-GTE engine) Link to comment Share on other sites More sharing options...
D3xt3r Posted July 24, 2005 Share Posted July 24, 2005 I dont think those turbos run in sequential mode. Isnt he using a HKS Twin Kit? Those run parallel so no better spool up in comparisson to a single. Link to comment Share on other sites More sharing options...
Gazboy Posted July 24, 2005 Share Posted July 24, 2005 Hold on, is it REALLY running 1050bhp on big twins? I didn't think it was possible (thought it was Fast Car's bollocks talk like saying he had a 3JZ-GTE engine) There are lots of Jap and Yank Supra's running 1000bhp+ on twins. Was it TDi that managed to do a sequential set-up on some (small) HKS twins??? Link to comment Share on other sites More sharing options...
mr keef Posted July 24, 2005 Share Posted July 24, 2005 I dont think those turbos run in sequential mode. Isnt he using a HKS Twin Kit? Those run parallel so no better spool up in comparisson to a single. na he says he doesnt like singles due to the low end lag etc so i would have thought it must spool up a dam sight better than a single. Link to comment Share on other sites More sharing options...
Kopite Posted July 24, 2005 Share Posted July 24, 2005 from what i've heard, it's not worth the price differance to go for big twins over a single - just has extra in the bling factor. Link to comment Share on other sites More sharing options...
AntD Posted July 24, 2005 Author Share Posted July 24, 2005 My main concern with the big single atm is the potential problem with lag at lower revs.As I said before,I'm new to all this and the lag may not be that big an issue in the end cos so many Supra owners are changing over/contemplating changing to the big single setup. Link to comment Share on other sites More sharing options...
D3xt3r Posted July 24, 2005 Share Posted July 24, 2005 I dont believe there will be any difference in lag. A good sized single will spool the same as twins for the same amount of HP. I also saw some info about this seq. stuff with little HKS turbos but wasnt it a big dissapointment? Link to comment Share on other sites More sharing options...
Alex Posted July 24, 2005 Share Posted July 24, 2005 2x2835's = 6-700 2x3037's = 8-900 2x3540's = 1000+ 2x3742's = 1200+ The lag issue is bollox imo... 6cylinders powering 1 turbo, getting every single pulse from the engine, using 1 highly efficient turbo is going to be better than 3cylinders to each highly efficent turbo. A turbo can only be built to certain tolerances, for arguments sake we'll say there is a 3% efficiency loss due to the turbine blades not being perfectly matched to the housing. 1 turbo has a 3% efficency loss...2turbo's have a 6% loss for the same power. It is true that the smaller the wheels the faster they spin up which should favour the twins, but, by halving the engine at the same time you lose lots of potential. Find a Dyno sheet for a 600BHP Single (T63-T67) and a pair of HKS 2835's and I'll bet the Single's onlie faster... Oh and the twins will weigh more too affecting the power to weight ratio. Twins are for bling...and for doubling your repair costs when they break. EDIT - There is no aftermarket Sequential Twin System. Link to comment Share on other sites More sharing options...
Chiefgroover Posted July 24, 2005 Share Posted July 24, 2005 I also saw some info about this seq. stuff with little HKS turbos but wasnt it a big dissapointment? The 2530 sequential system was a success, car was serviced by Tdi a while ago and is running fine. Cost of system vs max power gain wasn't a good equation. However the all around driveability was excellent. Nobody wanted a big sequential system more than me, but no more, bring on the power! If you want to see what 2835's with a decent fuel system can do, take a look at http://www.t04r.com there is a 823bhp graph there. each turbo is rated @ 450bhp. That web site is the best realistic review of the big turbo kits. As far as low end pull goes, in the wet/grease you'll be glad of the modest power output below 3500rpm. Fit an uprated valve spring kit and 264 cams - raise the rev limit to 8000 and you have a nice big 4000rpm power band, what else could you want? I dont hear many "BIG" owners complaining about how their car drives!. GO on, you know you want a big system :-) Link to comment Share on other sites More sharing options...
Gazboy Posted July 24, 2005 Share Posted July 24, 2005 The 2530 sequential system was a success, car was serviced by Tdi a while ago and is running fine. Cost of system vs max power gain wasn't a good equation. However the all around driveability was excellent. Nobody wanted a big sequential system more than me, but no more, bring on the power! If you want to see what 2835's with a decent fuel system can do, take a look at http://www.t04r.com there is a 823bhp graph there. each turbo is rated @ 450bhp. That web site is the best realistic review of the big turbo kits. As far as low end pull goes, in the wet/grease you'll be glad of the modest power output below 3500rpm. Fit an uprated valve spring kit and 264 cams - raise the rev limit to 8000 and you have a nice big 4000rpm power band, what else could you want? I dont hear many "BIG" owners complaining about how their car drives!. GO on, you know you want a big system :-) How much did the 2530 set up cost? Link to comment Share on other sites More sharing options...
Jake Posted July 24, 2005 Share Posted July 24, 2005 I wouldn't take any notice of the 10500nhp figure in that magazine. IIRC, Leon is claiming 500BHP for his entry to TOTB4 Link to comment Share on other sites More sharing options...
Bobbeh Posted July 24, 2005 Share Posted July 24, 2005 500bhp!! The 1050 is more believable. There is NO way his Supra can run a 10.0 with only 500bhp. BTW, does anyone know if that Blitz Turbo kit is a sequential setup? I'm guessing its not but just wanted someone to confirm this. Link to comment Share on other sites More sharing options...
D3xt3r Posted July 25, 2005 Share Posted July 25, 2005 It isnt and it just comes with headers, turbo and wastegate. You have to do all the rest for yourself like ic piping, oil lines, and so on. Link to comment Share on other sites More sharing options...
Guest Usmann A Posted July 26, 2005 Share Posted July 26, 2005 The lag issue is bollox imo... 6cylinders powering 1 turbo, getting every single pulse from the engine, using 1 highly efficient turbo is going to be better than 3cylinders to each highly efficent turbo. A turbo can only be built to certain tolerances, for arguments sake we'll say there is a 3% efficiency loss due to the turbine blades not being perfectly matched to the housing. 1 turbo has a 3% efficency loss...2turbo's have a 6% loss for the same power. Alex, AFAIK all 6 cylinders dumping into one turbo, through a commom header actually smoothen out the pulses, whereas having seperated headers, using meduim sized ARs with split housings actaully spread the pulses and increace thier amplitutde, instead of having a constant push, the turbines get shoves off the pulses which increaces spoolup times. That is why quite a few OEM 6s have twins turbos ... But on the subject of bigger twins, it becomes into a factor whether the AR gets too big and thier is not enough exhaust energy to drive the turbine, this is where a lovely 3.4 litre motor(more lower end torque) and big twins would have a nice fat powerband. Which is what Leons has I presume ?? Anyway, I have a single cos its more bang for ya buck!! Link to comment Share on other sites More sharing options...
Alex Posted July 26, 2005 Share Posted July 26, 2005 ..., the turbines get shoves off the pulses which increases spoolup times. That is why quite a few OEM 6s have twins turbos ... Increases or decreases? My point was that for the extra weight and cost you won't gain anything you can actually notice. Link to comment Share on other sites More sharing options...
Guest Usmann A Posted July 26, 2005 Share Posted July 26, 2005 increaces in spool up times Alex. I agree, but if funds allowed it would be nice to couple together some DBB small/medium turbined spilt pusled turbos sitting on nice long tubular headers,with proper wastegate control .. say like 2530s/40s ... with effiecnt intercooling,I would like to see when theyd make some boost on our lil torque'y engines ... and I dear say that power delivery would be oh so very linear ... Link to comment Share on other sites More sharing options...
Guest chiefvinso Posted July 26, 2005 Share Posted July 26, 2005 This was just the thing I was going to ask about. Once I get my car (just over two weeks) I will be looking soon afterwards for more power. Not knowing about bigger twins and if they were possible in sequential mode I was goingto ask you guys. Surely you could put bigger twins in sequential mode with the correct setup that would give you the same hp as bigger singles? The reason I ask is thatI went out in a twin turbo the other week (cheers Elliot) and the second turbo kicking in was awesome so I would like to do that with a bigger twins if at all possible. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now