Jump to content
The mkiv Supra Owners Club

Work Emotion CR Kai 18x 9,5 J +12 all round


Callaway Motorsport

Recommended Posts

Like new,

 

Been checked and recoated (by a proffessional wheel company) with an extra layer of clear.

Had these fitted on my own supra with +35mm front ridox fenders and stock rear.

 

Can be shipped anywhere, but will be cost to buyer.

 

 

Coated on inside too.

 

http://blog.dcautomotive.nl/wp-content/uploads/2011/11/DSC_0435.jpg

http://blog.dcautomotive.nl/wp-content/uploads/2011/11/DSC_0447.jpg

http://blog.dcautomotive.nl/wp-content/uploads/2011/11/DSC_0467.jpg

http://blog.dcautomotive.nl/wp-content/uploads/2011/11/DSC_0472.jpg

Link to comment
Share on other sites

Hi, can they clear stock arches front and rear and 400mm+ for the calipers at the front? Got some D2 356mm 8 pots to fit and been told I need 19's (or 18's according to the manufacturer's info). The front caliper outside face is 30mm from the wheel mounting surface when centred on the rotor so will need a bit more clearance and the actual measured diameter of the outermost part of the caliper is 397mm or as near as I can measure off the car.

 

I'll have them if they'll fit and the offsets aren't a problem, though the front looks an issue? :)

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.