Chris Wilson Posted December 2, 2011 Share Posted December 2, 2011 I am offering free insured P&P on selected parts from now until the end of January, to UK postcodes. Please see below. Used suspension pieces: I have two pairs front upper arms one pair front lower arms one LH front lower arm 2 pairs front ARB links 1 pair rear ARB links These fit both N/A and TT models. 1 pair front drilled J-Spec discs, very usable 1 pair front UK discs, again, very usable. Plenty of used OE J-Spec front discs in excellent condition, but no rears. Some excellent used front shocks, N/A and TT, but no rears. New parts: I am doing free insured UK postcode delivery on full sets of UK and J-Spec fast road pads from now until the end of January 2012. I now do these for plenty of other popular cars. I will also do free UK postcode delivery on my six speed uprated Supra TT clutch kits and my custom Bilstein based suspension kits, from now until the end of January 2012, which is a big saving as they are very heavy items. Free delivery on new genuine German made Bilstein dampers, too, for all cars they cater for, which is a vast range. I can do great prices on all Bilstein products, including full suspension kits, as I am a Bilstein re-seller that buys direct. Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted December 2, 2011 Share Posted December 2, 2011 you do your fast road pads for stoptech st-40 calipers? Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 2, 2011 Author Share Posted December 2, 2011 Almost certainly, have you a link to a pad outline? Or know what pad shape they use? It's very rare, (but not unknown), for modern calipers to have a totally bespoke pad shape. Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 2, 2011 Author Share Posted December 2, 2011 The answer is yes, they are actually a Porsche pad shape and quite a popular pad, I can get you a price in the morning, with luck, but about £75 to £85 an axle set. Link to comment Share on other sites More sharing options...
RHochreuter Posted December 2, 2011 Share Posted December 2, 2011 what is the price on your custom Bilstein based suspension kits Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 2, 2011 Author Share Posted December 2, 2011 £1280 plus VAT fitted with the geo custom set. Obviously with you being outside of the UK that is probably of no use, in which case I can do supply only and furnish you with some set up suggestions to suit your desired goals, for about £875 UK pounds plus VAT. I would need to get advice on carriage costs. Thanks. Link to comment Share on other sites More sharing options...
Scott Posted December 2, 2011 Share Posted December 2, 2011 What condition are the front lowers in Chris? I'm after a REALLY good pair if possible, I've been holding out for Keron getting a good one in but it's been a while now. I'm also after a rear upper (not sure which side) and a rear lower (again not sure what side but it's the heavier one that the strut attaches to). If you have the above in good nick let me know a price and I'll maybe have them off you (If the sides are correct lol). Thanks Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 2, 2011 Author Share Posted December 2, 2011 Plenty of surface rust, but the bushes and ball joints are OK. So not pretty, but functional, like the wife Link to comment Share on other sites More sharing options...
Scott Posted December 2, 2011 Share Posted December 2, 2011 I'll email you the pics of what I have, looking for similar condition Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted December 2, 2011 Share Posted December 2, 2011 Almost certainly, have you a link to a pad outline? Or know what pad shape they use? It's very rare, (but not unknown), for modern calipers to have a totally bespoke pad shape. Yeah i can get you a pad outline, i also need some replacement rotors aswell, will give you call start of the week. Definately need the pads anyway. Thanks for the response. Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 2, 2011 Author Share Posted December 2, 2011 I am 99% sure of the outline, but always pays to play safe. I think these will be what you have: http://www.zeckhausen.com/StopTech/ST40_pads.htm I can get these in my fast road compound inside three days. I may even have one set in stock, but not here. Whether I can match discs, and at what price though, is an issue. I deal with AP, Brembo and Alcon, and all their race discs in circa 350 mm and above, are over 220 a piece. Sometimes people like Stoptech have odd ball discs cast that don't match anything else, so you g=have to buy from them, getting Taiwanese discs at high prices I would really need a proper engineering drawing of a disc to check what, if anything, matches, or a sample to measure properly. Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted December 3, 2011 Share Posted December 3, 2011 WhenI get home i'll confirm those are the right ones, I think they are but I seem to remember there being two different variations of ST-40 pads, could be wonrg. As for the discs, they're 355x32 I think and the nearest quote I got was £450 for two, I dont even think that included bells, just rotors! I cant take them off for very long as the car is driven daily but I'll search around and find out if there are any drawings from stoptech floating about and match them to mine. Link to comment Share on other sites More sharing options...
Recommended Posts