Noz Posted November 25, 2011 Share Posted November 25, 2011 So...ive got this turbo.. T61 turbo is 61mm blade on compressor... the turbo says its a T67... contacted manufacture XS and they say its wrong label... measured inside diameter and its 70mm... T70 is cheaper than T61 so def.not getting a better deal. Any sources soi know im measuring the turbo correctly.... thanks Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted November 25, 2011 Share Posted November 25, 2011 You going XS Power turbo? Quote Link to comment Share on other sites More sharing options...
mellonman Posted November 25, 2011 Share Posted November 25, 2011 isint it normally stampped on the housing where it bolts Quote Link to comment Share on other sites More sharing options...
JamieP Posted November 25, 2011 Share Posted November 25, 2011 Just take the cover off and measure the wheel to get the size, google "measuring inducer wheel" and you will see what i mean. Quote Link to comment Share on other sites More sharing options...
imi Posted November 25, 2011 Share Posted November 25, 2011 You going XS Power turbo? nothing like splashing out ehh Quote Link to comment Share on other sites More sharing options...
Noz Posted November 25, 2011 Author Share Posted November 25, 2011 Id rather get it running before i get an expensive turbo. Thanks jamie. Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted November 25, 2011 Share Posted November 25, 2011 Id rather get it running before i get an expensive turbo. Thanks jamie. Thats a nice way to go about it, best of luck with the whole build. its in safe hands mind Quote Link to comment Share on other sites More sharing options...
Noz Posted November 25, 2011 Author Share Posted November 25, 2011 Thats a nice way to go about it, best of luck with the whole build. its in safe hands mind Thanks mate. I already know what bits I want, but these bits will help get it all running What turbo do you have on your single? GUYS.... problem solved: http://www.clubna-t.com/forums/showthread.php?t=4423&page=2 The turbo they sell is actually slightly larger than 61mm which explains why people are wondering why they keep getting high figures with a 61mm turbo, before its a T61 with 69mm inducer... nothing like confusing the customers. Most people on the forum were pleased, to be fair I'm not as I want 400bhp as quick as possible and this isn't fitting in with that power target. Oh well, fingers crossed it spools before 5,000rpm. Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted November 25, 2011 Share Posted November 25, 2011 BWS362, bullseye power. With the twin gate manifold it should be a spool weapon but like you im not going mental power but im also building the car the best i can on the money i earn. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.