Jamesy Posted October 25, 2011 Share Posted October 25, 2011 (edited) Just wanted to throw around some ideas here if poss.. peoples opinions and experiences etc Edited November 9, 2011 by Jamesy (see edit history) Quote Link to comment Share on other sites More sharing options...
Jamesy Posted October 25, 2011 Author Share Posted October 25, 2011 Here's a decent looking one for starters at a good price: http://www.horsepowerfreaks.com/partdetails/Clutch_Masters/Clutch/Clutch_Kits/Stage_3_FX300/9689 Quote Link to comment Share on other sites More sharing options...
Jamesy Posted October 25, 2011 Author Share Posted October 25, 2011 JG suggested the HPF Bronze which looks pretty good: http://www.horsepowerfreaks.com/partdetails/HPF/Clutch/Clutch_Kits/Bronze_-_Supra_MK4_Turbo/2296 Quote Link to comment Share on other sites More sharing options...
JamieP Posted October 25, 2011 Share Posted October 25, 2011 Here's a decent looking one for starters at a good price: http://www.horsepowerfreaks.com/partdetails/Clutch_Masters/Clutch/Clutch_Kits/Stage_3_FX300/9689 street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. Single plate clutch, wont be any good for 800bhp and 700ftlb imo. Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted October 25, 2011 Share Posted October 25, 2011 Competition Clutches that Paul has? I bought a stage 4 6 puck with a light weight flywheel. Used by quite a few members with no issues. Quote Link to comment Share on other sites More sharing options...
J_Supra_07 Posted October 25, 2011 Share Posted October 25, 2011 Iam running an exedy twin plate. At first it feels sharp but after time you get use to it. Only down fall is the rattel but single clutchs just won't cut it. Quote Link to comment Share on other sites More sharing options...
mark newman Posted October 25, 2011 Share Posted October 25, 2011 No Single plate clutch, That I have had ,and I Have had three of so far, will not take much over 700 bhp on a track or any hard pulls,on the roads. I took out a new 6 puck with one launch at the drag strip. I like the HKS triple ,that works very well, for me now. Quote Link to comment Share on other sites More sharing options...
Jamesy Posted October 25, 2011 Author Share Posted October 25, 2011 No Single plate clutch, That I have had ,and I Have had three of so far, will not take much over 700 bhp on a track or any hard pulls,on the roads. I took out a new 6 puck with one launch at the drag strip. I like the HKS triple ,that works very well, for me now. got a link to your triple plate mate? Quote Link to comment Share on other sites More sharing options...
Jamesy Posted October 25, 2011 Author Share Posted October 25, 2011 (edited) Iam running an exedy twin plate. At first it feels sharp but after time you get use to it. Only down fall is the rattel but single clutchs just won't cut it. Yeah single plate clutch is going to be no good mate Edited November 10, 2011 by Jamesy (see edit history) Quote Link to comment Share on other sites More sharing options...
JamieP Posted October 25, 2011 Share Posted October 25, 2011 any info on this exedy one? Exedy twin (unless the carbon one) is only rated to 450ftlb iirc, again no good for you mate. Save up, spend once on the right clutch, time to time a decent twin/triple will come up secondhand. Quote Link to comment Share on other sites More sharing options...
Jamesy Posted October 25, 2011 Author Share Posted October 25, 2011 time to time a decent twin/triple will come up secondhand. Yeah true, Terminators OSG one last week would have been a good one and that was £550ish Quote Link to comment Share on other sites More sharing options...
JamieP Posted October 25, 2011 Share Posted October 25, 2011 Yeah true, Terminators OSG one last week would have been a good one and that was £550ish That would have been perfect for you. Quote Link to comment Share on other sites More sharing options...
Guest Supradrifting Posted October 25, 2011 Share Posted October 25, 2011 Im going to build a drift car out of my supra over the winter, aiming for around 650@ wheels on E85. What clutch would you recommend? Quote Link to comment Share on other sites More sharing options...
Jamesy Posted October 25, 2011 Author Share Posted October 25, 2011 Competition Clutches that Paul has? I bought a stage 4 6 puck with a light weight flywheel. Used by quite a few members with no issues. the most expensive comptetion clutch he has is this one mate and i dont hink its going to be any good for me: http://whifbitzperformancetuning.co.uk/toyota-supra-supra-clutches-flywheels-competition-clutch-p-2404.html Quote Link to comment Share on other sites More sharing options...
CanisLupus Posted October 25, 2011 Share Posted October 25, 2011 Exedy twin (unless the carbon one) is only rated to 450ftlb iirc, again no good for you mate. Save up, spend once on the right clutch, time to time a decent twin/triple will come up secondhand. Exedy states in their Manual for the twin that it copes with 830nm/~610ftlb. Linky Page 18 Quote Link to comment Share on other sites More sharing options...
JamieP Posted October 25, 2011 Share Posted October 25, 2011 (edited) Exedy states in their Manual for the twin that it copes with 830nm/~610ftlb. Linky Page 18 I cant get that link to work, i just looked on jamesys HPF link at it states 475ftlb for a carbon twin. http://www.horsepowerfreaks.com/partdetails/Exedy/Clutch/Clutch_Kits/D-Core_Carbon_Twin/11791 Edit, and this one says 426ftlb. http://www.horsepowerfreaks.com/partdetails/Exedy/Clutch/Clutch_Kits/Hyper_Carbon_Twin/5541 Edited October 25, 2011 by JamieP (see edit history) Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted October 25, 2011 Share Posted October 25, 2011 Giken triple with movement reversal kit and shorter flywheel bolts is probably a good choice so long as you don't slip it a lot. Quote Link to comment Share on other sites More sharing options...
CanisLupus Posted October 25, 2011 Share Posted October 25, 2011 I cant get that link to work, i just looked on jamesys HPF link at it states 475ftlb for a carbon twin. http://www.horsepowerfreaks.com/partdetails/Exedy/Clutch/Clutch_Kits/D-Core_Carbon_Twin/11791 Edit, and this one says 426ftlb. http://www.horsepowerfreaks.com/partdetails/Exedy/Clutch/Clutch_Kits/Hyper_Carbon_Twin/5541 Strange try copying it http://www.exedy.co.uk/M300.pdf Edit Uploaded it: M300.pdf Quote Link to comment Share on other sites More sharing options...
JamieP Posted October 25, 2011 Share Posted October 25, 2011 Either way, still no good for jamesys 700ftlb. Quote Link to comment Share on other sites More sharing options...
hodge Posted October 25, 2011 Share Posted October 25, 2011 It pains me to say this BUT my Ogura twin plate has some serious balls. Once we managed to get it all set up right it never missed abeat at my power. Quote Link to comment Share on other sites More sharing options...
Jamesy Posted October 25, 2011 Author Share Posted October 25, 2011 Where was that from John Quote Link to comment Share on other sites More sharing options...
hodge Posted October 25, 2011 Share Posted October 25, 2011 I got it from Jurgen. He had it spare from a car he had in. Quote Link to comment Share on other sites More sharing options...
CanisLupus Posted October 26, 2011 Share Posted October 26, 2011 Either way, still no good for jamesys 700ftlb. Yup Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted October 26, 2011 Share Posted October 26, 2011 the most expensive comptetion clutch he has is this one mate and i dont hink its going to be any good for me: http://whifbitzperformancetuning.co.uk/toyota-supra-supra-clutches-flywheels-competition-clutch-p-2404.html Yeah thinking about it they are only rate to 250% increase in torque. I migh need to upgrade too. If so I will go forone of these: Carbonetic twin plate carbon clutches. Think they are around £1800. Rated to around 900ps. There is also a triple plate carbon clutch and they are rated to 1500ps Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted October 26, 2011 Share Posted October 26, 2011 It pains me to say this BUT my Ogura twin plate has some serious balls. Once we managed to get it all set up right it never missed abeat at my power.thats a proper clutch, will last for ages Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.