Jellybean Posted October 9, 2011 Share Posted October 9, 2011 Boost controller is not reading correct boost, Defi guage has roughly 1.2 bar but AVCR 0.23 bar , I have her set on the lowest duty cycle , normally you would set it around the 60% mark I have checked all Vac Lines,, looks good; I am thinking it is the APEXi Boost Pressure Sensor, the screw in the head of it is rusted from last winter (controller is only 2 years old) Any way I can test the Sensor? It is 100 euro to buy but dont want to waste money. The Solenoid sounds as if it is working after I WD40 it, if anybody knows how to test it too; Its 125 euro. Or if anybody recommends a cheap alternative, to just keep her at 1.2 bar Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.