Lurch Posted September 18, 2011 Share Posted September 18, 2011 Hello, I'm looking at buying some rota's and found some that are 18x10 ET15 and 5x114.3 fitment. Will they fit right? Thanks in advanced Quote Link to comment Share on other sites More sharing options...
JamieP Posted September 18, 2011 Share Posted September 18, 2011 They will stick out to far, look for somewhere between ET 45-30 for a 10" wheel on the rear of a stock body Supra. Lower offsets will fit if you stretch tyres but its not advisable. Quote Link to comment Share on other sites More sharing options...
Littler Posted September 18, 2011 Share Posted September 18, 2011 That's the right bolt pattern fitment but as Jamie says with that offset it would come out the arches too much. I've been looking at wheels myself and having seen a few fitments on different Supra's for a 10" an offset of 35 looks to sit well, but not sure whether the arches were rolled if I'm honest. Hope this helps Quote Link to comment Share on other sites More sharing options...
Lurch Posted September 18, 2011 Author Share Posted September 18, 2011 Ahh right. Thats ashame, I really liked the style of them. Thanks alot guys. They look pretty simular to my rays in my avatar but the rays are too straight and look a bit too far back if you know what i mean. I'm just trying to get a better stance. A bit like this... Quote Link to comment Share on other sites More sharing options...
Littler Posted September 18, 2011 Share Posted September 18, 2011 I know they are available in a 9.5" wide with an offset of 30: http://www.rarerims.co.uk/wheelshop_products.asp?productid=30&rangeid=2&product=GTR Not sure how set on 10" you are, but the above should fit without any problems I think Quote Link to comment Share on other sites More sharing options...
Lurch Posted September 18, 2011 Author Share Posted September 18, 2011 (edited) Is it possible for the fronts to look the same rather than straight or is it just the width of the rears that makes them go out like that, Just out of interested? Would that be the perfect fitment? My arches have been rolled too. Thanks again for the help Edit: Not I'm not fussed about them being 10". I just really trying to get the right stance/ look that I'm after. Edited September 18, 2011 by Lurch (see edit history) Quote Link to comment Share on other sites More sharing options...
Littler Posted September 18, 2011 Share Posted September 18, 2011 Is it possible for the fronts to look the same rather than straight or is it just the width of the rears that makes them go out like that, Just out of interested? Would that be the perfect fitment? My arches have been rolled too. Thanks again for the help I think the straightness of the spokes does depend on the width but it may be to do with the offset too, someone with a little more knowledge will be able to confirm it I'm sure If you have your arches rolled then you shouldn't have a problem with the 9.5" and an offset of 30, try this an put your figures in: http://www.kulthea.net/fitment.xls Quote Link to comment Share on other sites More sharing options...
Lurch Posted September 18, 2011 Author Share Posted September 18, 2011 Yep, think there right, just come accross this thread http://www.mkivsupra.net/vbb/showthread.php?232874-Going-to-order-my-new-Rota-GTR-s-tomorrow!!/page2 and thats pretty much the look I'm after and it says the same offset you said... Quote Link to comment Share on other sites More sharing options...
Littler Posted September 18, 2011 Share Posted September 18, 2011 Yep, think there right, just come accross this thread http://www.mkivsupra.net/vbb/showthread.php?232874-Going-to-order-my-new-Rota-GTR-s-tomorrow!!/page2 and thats pretty much the look I'm after and it says the same offset you said... Yep they look a good fit! And a really nice look too! Quote Link to comment Share on other sites More sharing options...
Lurch Posted September 18, 2011 Author Share Posted September 18, 2011 Thanks alot for your time and effort, Much appreciated. Think I will go for them to be honest. I just need to decide red lip or not and matt black or not now! More swaying towards matt black with a red lip. Quote Link to comment Share on other sites More sharing options...
Littler Posted September 18, 2011 Share Posted September 18, 2011 Thanks alot for your time and effort, Much appreciated. Think I will go for them to be honest. I just need to decide red lip or not and matt black or not now! More swaying towards matt black with a red lip. No probs! I would go for the matt black or gun metal, not too keen on the red lip, saying that its just down to personal perference Quote Link to comment Share on other sites More sharing options...
Lurch Posted September 18, 2011 Author Share Posted September 18, 2011 Anyone know what its like to paint matt black? Can you get a touch up pen for Matt black? I'm asking incase of chips and stuff. My black alloys are curbed a bit but as soon as you dab a bit of black on it you can hardly notice it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.