Scott Posted September 1, 2011 Share Posted September 1, 2011 As above, I need the packing seal stuff used to seal the front cam bearings. I asked about an alternative but noone seems to know of any. Can any of the guys working in the industry see if your toyota supplier can supply the above? According to my guy it's a minimum order for some reason, I'm thinking it might be an off the shelf item and as they have just started they don't have any in stock. 08826-00080 is the original number I got from the manual 00295-00103 is the number I read this had been changed to? Either or would be great. Think it works out around £15. Cheers Link to comment Share on other sites More sharing options...
Scott Posted September 1, 2011 Author Share Posted September 1, 2011 On another note, is there any reason I can't use this stuff... http://www.ebay.co.uk/itm/LOCTITE-INSTANT-GASKET-FLANGE-SEALANT-/180717503916?pt=UK_Motorcycle_Parts&hash=item2a139a45ac Link to comment Share on other sites More sharing options...
hodge Posted September 1, 2011 Share Posted September 1, 2011 If you mean the sealant you put under the front cam journal caps. I just used sikaflex. Job done. Link to comment Share on other sites More sharing options...
Scott Posted September 1, 2011 Author Share Posted September 1, 2011 That's not so bad then. The loctite stuff should do the job nicely! I was worried that it had some special properties or something-or-other lol. Cheers John Link to comment Share on other sites More sharing options...
hodge Posted September 1, 2011 Share Posted September 1, 2011 That's not so bad then. The loctite stuff should do the job nicely! I was worried that it had some special properties or something-or-other lol. Cheers John No mate not really. As long as the surface is clean and dry it will be fine. I used it on my sump pans too and my oil pump. I've had no issues as yet. Link to comment Share on other sites More sharing options...
Chris Wilson Posted September 2, 2011 Share Posted September 2, 2011 That Loctite stuff is perfect, or use blue Hylomar, that also works just fine. I use either. Link to comment Share on other sites More sharing options...
Scott Posted September 2, 2011 Author Share Posted September 2, 2011 Cheers Chris. I ordered it yesterday so with any luck it will come tomorrow and I can get my head finished Link to comment Share on other sites More sharing options...
Andy-No-Knee Posted September 2, 2011 Share Posted September 2, 2011 Great news.... I have Locktite in the garage already from when I did the diff and tranny oil sump! Link to comment Share on other sites More sharing options...
Recommended Posts