Heyrick Posted August 25, 2011 Share Posted August 25, 2011 As above if you have a good one of each of these left over from a brake refurb I'd be very grateful. A previous spanner monkey had put a screwdriver through the dust seal and this let the water in on that piston. It wasn't leaking but the surface rust isn't too good and need to get it sealed up too. Don't want to get a kit just for one piston if I can help it. Thanks for looking! Link to comment Share on other sites More sharing options...
Paul372 Posted August 26, 2011 Share Posted August 26, 2011 pm chris wilson Link to comment Share on other sites More sharing options...
Dnk Posted August 26, 2011 Share Posted August 26, 2011 The Toyota refurb kits only contain the piston inner seals, outer dirt seals + retaining rings, banjo copper washer, bleed nipple covers and grease. You buy the pistons seperately. I'll have to look in my parts box as i might have some outer seals with retaining rings, can't check till tomorrow though. Link to comment Share on other sites More sharing options...
Heyrick Posted August 26, 2011 Author Share Posted August 26, 2011 pm chris wilson Already pointed him to this thread in an unrelated PM so I think he would have answered if he had anything. I'll have to look in my parts box as i might have some outer seals with retaining rings, can't check till tomorrow though. Thanks - any bits appreciated! Link to comment Share on other sites More sharing options...
Dnk Posted August 26, 2011 Share Posted August 26, 2011 I'll post up tomorrow. I think regarding the piston your best bet is to buy a new one. Link to comment Share on other sites More sharing options...
Dnk Posted August 27, 2011 Share Posted August 27, 2011 Sorry mate the only seals i've got is a new refurb kit for the uk rears. Link to comment Share on other sites More sharing options...
dash Posted August 27, 2011 Share Posted August 27, 2011 Would you be interested in selling the kit for the rears? Link to comment Share on other sites More sharing options...
Dnk Posted August 27, 2011 Share Posted August 27, 2011 Would you be interested in selling the kit for the rears? I have a refurb to do on a pair of uk rears so i shall be needing these so sorry their not for sale, your local Toyota dealer will be able to get them easy enough. Link to comment Share on other sites More sharing options...
dash Posted August 27, 2011 Share Posted August 27, 2011 I have a refurb to do on a pair of uk rears so i shall be needing these so sorry their not for sale, your local Toyota dealer will be able to get them easy enough. O.k. no problem. Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 28, 2011 Share Posted August 28, 2011 I don't have any single good pistons or seals either, sorry. I will be making some more stainless pistons, I will try to remember to make an odd number of each so I have a spare piton for each size. Cheers. Link to comment Share on other sites More sharing options...
Heyrick Posted September 1, 2011 Author Share Posted September 1, 2011 Thanks for replying Chris. Someone may be able to supply a piston after this weekend but still need a useable dust seal - anybody? Link to comment Share on other sites More sharing options...
Recommended Posts